[PATCH] ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz

[Vineet Gupta]

On 09/28/2017 07:33 AM, Eugeniy Paltsev wrote:
> Add temporary fix to HSDK platform code to setup CPU frequency
> to 1GHz on early boot.
> We can remove this fix when smart hsdk pll driver will be
> introduced, see discussion:
> https://www.mail-archive.com/linux-snps-arc@lists.infradead.org/msg02689.html
> 
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
> ---
>   arch/arc/plat-hsdk/platform.c | 42 ++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arc/plat-hsdk/platform.c b/arch/arc/plat-hsdk/platform.c
> index a2e7fd1..744e62e 100644
> --- a/arch/arc/plat-hsdk/platform.c
> +++ b/arch/arc/plat-hsdk/platform.c
> @@ -38,6 +38,42 @@ static void __init hsdk_init_per_cpu(unsigned int cpu)
>   #define CREG_PAE		(CREG_BASE + 0x180)
>   #define CREG_PAE_UPDATE		(CREG_BASE + 0x194)
>   
> +#define CREG_CORE_IF_CLK_DIV	(CREG_BASE + 0x4B8)
> +#define CREG_CORE_IF_CLK_DIV_2	0x1
> +#define CGU_BASE		ARC_PERIPHERAL_BASE
> +#define CGU_PLL_STATUS		(ARC_PERIPHERAL_BASE + 0x4)
> +#define CGU_PLL_CTRL		(ARC_PERIPHERAL_BASE + 0x0)
> +#define CGU_PLL_STATUS_LOCK	BIT(0)
> +#define CGU_PLL_STATUS_ERR	BIT(1)
> +#define CGU_PLL_CTRL_1GHZ	0x3A10
> +#define HSDK_PLL_LOCK_TIMEOUT	500
> +
> +#define HSDK_PLL_LOCKED() \
> +	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_LOCK)
> +
> +#define HSDK_PLL_ERR() \
> +	!!(ioread32((void __iomem *) CGU_PLL_STATUS) & CGU_PLL_STATUS_ERR)
> +
> +static void __init hsdk_set_cpu_freq_1ghz(void)
> +{
> +	u32 timeout = HSDK_PLL_LOCK_TIMEOUT;
> +
> +	/*
> +	 * As we set cpu clock which exceeds 500MHz, the divider for the interface
> +	 * clock must be programmed to div-by-2.
> +	 */
> +	iowrite32(CREG_CORE_IF_CLK_DIV_2, (void __iomem *) CREG_CORE_IF_CLK_DIV);
> +
> +	/* Set cpu clock to 1GHz */
> +	iowrite32(CGU_PLL_CTRL_1GHZ, (void __iomem *) CGU_PLL_CTRL);
> +
> +	while (!HSDK_PLL_LOCKED() && timeout--)
> +		cpu_relax();
> +
> +	if (!HSDK_PLL_LOCKED() || HSDK_PLL_ERR())
> +		pr_err("Failed to setup CPU frequency to 1GHz!");
> +}
> +
>   static void __init hsdk_init_early(void)
>   {
>   	/*
> @@ -52,6 +88,12 @@ static void __init hsdk_init_early(void)
>   
>   	/* Really apply settings made above */
>   	writel(1, (void __iomem *) CREG_PAE_UPDATE);
> +
> +	/*
> +	 * Setup CPU frequency to 1GHz.
> +	 * TODO: remove it after smart hsdk pll driver will be introduced.
> +	 */
> +	hsdk_set_cpu_freq_1ghz();
>   }

While this suffices our needs in the interim, is there a way to invoke the 
existing clk driver to achieve the same results ?

>   
>   static const char *hsdk_compat[] __initconst = {
>