[PATCH 04/10] ARC: typos fix in kernel/entry-compact.S

Noam Camus noamca at mellanox.com
Wed May 24 19:34:14 PDT 2017


From: Liav Rehana <liavr at mellanox.com>

Signed-off-by: Liav Rehana <liavr at mellanox.com>
Signed-off-by: Noam Camus <noamca at mellanox.com>
---
 arch/arc/kernel/entry-compact.S |   22 +++++++++++-----------
 1 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arc/kernel/entry-compact.S b/arch/arc/kernel/entry-compact.S
index 9211707..f285dbb 100644
--- a/arch/arc/kernel/entry-compact.S
+++ b/arch/arc/kernel/entry-compact.S
@@ -25,12 +25,12 @@
  *
  * vineetg: Nov 2009 (Everything needed for TIF_RESTORE_SIGMASK)
  *  -do_signal()invoked upon TIF_RESTORE_SIGMASK as well
- *  -Wrappers for sys_{,rt_}sigsuspend() nolonger needed as they don't
+ *  -Wrappers for sys_{,rt_}sigsuspend() no longer needed as they don't
  *   need ptregs anymore
  *
  * Vineetg: Oct 2009
  *  -In a rare scenario, Process gets a Priv-V exception and gets scheduled
- *   out. Since we don't do FAKE RTIE for Priv-V, CPU excpetion state remains
+ *   out. Since we don't do FAKE RTIE for Priv-V, CPU exception state remains
  *   active (AE bit enabled).  This causes a double fault for a subseq valid
  *   exception. Thus FAKE RTIE needed in low level Priv-Violation handler.
  *   Instr Error could also cause similar scenario, so same there as well.
@@ -59,7 +59,7 @@
  */
 
 #include <linux/errno.h>
-#include <linux/linkage.h>	/* {EXTRY,EXIT} */
+#include <linux/linkage.h>	/* {ENTRY,EXIT} */
 #include <asm/entry.h>
 #include <asm/irqflags.h>
 
@@ -80,8 +80,8 @@
 	.align 4
 
 /* Each entry in the vector table must occupy 2 words. Since it is a jump
- * across sections (.vector to .text) we are gauranteed that 'j somewhere'
- * will use the 'j limm' form of the intrsuction as long as somewhere is in
+ * across sections (.vector to .text) we are guaranteed that 'j somewhere'
+ * will use the 'j limm' form of the instruction as long as somewhere is in
  * a section other than .vector.
  */
 
@@ -105,13 +105,13 @@ VECTOR   handle_interrupt_level1 ; Other devices
 
 ; ******************** Exceptions **********************
 VECTOR   EV_MachineCheck         ; 0x100, Fatal Machine check   (0x20)
-VECTOR   EV_TLBMissI             ; 0x108, Intruction TLB miss   (0x21)
+VECTOR   EV_TLBMissI             ; 0x108, Instruction TLB miss  (0x21)
 VECTOR   EV_TLBMissD             ; 0x110, Data TLB miss         (0x22)
 VECTOR   EV_TLBProtV             ; 0x118, Protection Violation  (0x23)
 				 ;         or Misaligned Access
 VECTOR   EV_PrivilegeV           ; 0x120, Privilege Violation   (0x24)
 VECTOR   EV_Trap                 ; 0x128, Trap exception        (0x25)
-VECTOR   EV_Extension            ; 0x130, Extn Intruction Excp  (0x26)
+VECTOR   EV_Extension            ; 0x130, Extn Instruction Excp (0x26)
 
 .rept   24
 VECTOR   reserved                ; Reserved Exceptions
@@ -199,7 +199,7 @@ END(handle_interrupt_level2)
 
 ; ---------------------------------------------
 ; User Mode Memory Bus Error Interrupt Handler
-; (Kernel mode memory errors handled via seperate exception vectors)
+; (Kernel mode memory errors handled via separate exception vectors)
 ; ---------------------------------------------
 ENTRY(mem_service)
 
@@ -273,7 +273,7 @@ ENTRY(EV_TLBProtV)
 	;------ (5) Type of Protection Violation? ----------
 	;
 	; ProtV Hardware Exception is triggered for Access Faults of 2 types
-	;   -Access Violaton	: 00_23_(00|01|02|03)_00
+	;   -Access Violation	: 00_23_(00|01|02|03)_00
 	;			         x  r  w  r+w
 	;   -Unaligned Access	: 00_23_04_00
 	;
@@ -327,7 +327,7 @@ END(call_do_page_fault)
 
 .Lrestore_regs:
 
-	# Interrpts are actually disabled from this point on, but will get
+	# Interrupts are actually disabled from this point on, but will get
 	# reenabled after we return from interrupt/exception.
 	# But irq tracer needs to be told now...
 	TRACE_ASM_IRQ_ENABLE
@@ -335,7 +335,7 @@ END(call_do_page_fault)
 	lr	r10, [status32]
 
 	; Restore REG File. In case multiple Events outstanding,
-	; use the same priorty as rtie: EXCPN, L2 IRQ, L1 IRQ, None
+	; use the same priority as rtie: EXCPN, L2 IRQ, L1 IRQ, None
 	; Note that we use realtime STATUS32 (not pt_regs->status32) to
 	; decide that.
 
-- 
1.7.1




More information about the linux-snps-arc mailing list