[PATCH 1/2] axs103: Clean-up smp_kick_all_cpus()

Alexey Brodkin Alexey.Brodkin at synopsys.com
Fri Mar 31 02:01:24 PDT 2017


 * Rely on default pulse polarity value
 * Don't mess with "multicore" value as it doesn't affect execution

In essence we now do a bare minimal stuff:
 1) Select HS38x2_1 with CORE_SEL=1 bits
 2) Select "manual" core start (via CREG) with START_MODE=0
 3) Generate cpu_start pulse with START=1

Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
---
 board/synopsys/axs10x/axs10x.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/board/synopsys/axs10x/axs10x.c b/board/synopsys/axs10x/axs10x.c
index a5e774b2cf7b..57c790220f71 100644
--- a/board/synopsys/axs10x/axs10x.c
+++ b/board/synopsys/axs10x/axs10x.c
@@ -61,16 +61,14 @@ void smp_kick_all_cpus(void)
 {
 /* CPU start CREG */
 #define AXC003_CREG_CPU_START	0xF0001400
-
 /* Bits positions in CPU start CREG */
 #define BITS_START	0
-#define BITS_POLARITY	8
+#define BITS_START_MODE	4
 #define BITS_CORE_SEL	9
-#define BITS_MULTICORE	12
-
-#define CMD	(1 << BITS_MULTICORE) | (1 << BITS_CORE_SEL) | \
-		(1 << BITS_POLARITY) | (1 << BITS_START)
 
-	writel(CMD, (void __iomem *)AXC003_CREG_CPU_START);
+	int cmd = readl((void __iomem *)AXC003_CREG_CPU_START);
+	cmd |= (1 << BITS_CORE_SEL) | (1 << BITS_START);
+	cmd &= ~(1 << BITS_START_MODE);
+	writel(cmd, (void __iomem *)AXC003_CREG_CPU_START);
 }
 #endif
-- 
2.7.4




More information about the linux-snps-arc mailing list