[PATCH RESEND] CLK: ARC: Set initial pll output frequency specified in device tree

[Eugeniy Paltsev]

On Tue, 2017-11-14 at 15:46 -0800, sboyd at codeaurora.org wrote:
> On 11/14, Alexey Brodkin wrote:
> > Hi Vladimir,
> > 
> > On Tue, 2017-11-14 at 19:01 +0200, Vladimir Zapolskiy wrote:
> > > On 11/14/2017 02:20 PM, Eugeniy Paltsev wrote:
> > > > 
> > > > Add option to set initial output frequency of plls via
> > > > "clock-frequency" property in pll's device tree node.
> > > > This frequency will be set while pll driver probed.
> > > > 
> > > > The usage example is setting CPU clock frequency on boot
> > > > See discussion:
> > > > https://urldefense.proofpoint.com/v2/url?u=https-3A__www.mail-2Darchive.com_linux-2Dsnps-2Darc-40lists.infradead.org_msg02689.html&d=DwICAg&c=
> > > > DPL6
> > > > _X_6JkXFx7AXWqB0tg&r=lqdeeSSEes0GFDDl656eViXO7breS55ytWkhpk5R81I&m=vTFoSv1E8NyQC8nqe6pwvuTDxGvEefhAdGwAoABOrY4&s=sbmMnczdKP317bN973cZn2WcYF29k
> > > > VMLW
> > > > chYfhSGT2M&e=
> > > > 
> > > > Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev at synopsys.com>
> > > > ---
> > > >  .../bindings/clock/snps,hsdk-pll-clock.txt         |  5 ++++
> > > >  .../devicetree/bindings/clock/snps,pll-clock.txt   |  5 ++++
> > > >  drivers/clk/axs10x/pll_clock.c                     | 34 ++++++++++++++++++++--
> > > >  drivers/clk/clk-hsdk-pll.c                         | 34 ++++++++++++++++++++--
> > > >  4 files changed, 74 insertions(+), 4 deletions(-)
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
> > > > index c56c755..5703059 100644
> > > > --- a/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
> > > > +++ b/Documentation/devicetree/bindings/clock/snps,hsdk-pll-clock.txt
> > > > @@ -13,6 +13,10 @@ Required properties:
> > > >  - clocks: shall be the input parent clock phandle for the PLL.
> > > >  - #clock-cells: from common clock binding; Should always be set to 0.
> > > >  
> > > > +Optional properties:
> > > > +- clock-frequency: output frequency generated by pll in Hz which will be set
> > > > +while probing. Should be a single cell.
> > > > +
> > > >  Example:
> > > >  	input_clk: input-clk {
> > > >  		clock-frequency = <33333333>;
> > > > @@ -25,4 +29,5 @@ Example:
> > > >  		reg = <0x00 0x10>;
> > > >  		#clock-cells = <0>;
> > > >  		clocks = <&input_clk>;
> > > > +		clock-frequency = <1000000000>;
> > > >  	};
> > > > diff --git a/Documentation/devicetree/bindings/clock/snps,pll-clock.txt b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
> > > > index 11fe487..5908f99 100644
> > > > --- a/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
> > > > +++ b/Documentation/devicetree/bindings/clock/snps,pll-clock.txt
> > > > @@ -13,6 +13,10 @@ registers and second for corresponding LOCK CGU register.
> > > >  - clocks: shall be the input parent clock phandle for the PLL.
> > > >  - #clock-cells: from common clock binding; Should always be set to 0.
> > > >  
> > > > +Optional properties:
> > > > +- clock-frequency: output frequency generated by pll in Hz which will be set
> > > > +while probing. Should be a single cell.
> > > > +
> > > >  Example:
> > > >  	input-clk: input-clk {
> > > >  		clock-frequency = <33333333>;
> > > > @@ -25,4 +29,5 @@ Example:
> > > >  		reg = <0x80 0x10>, <0x100 0x10>;
> > > >  		#clock-cells = <0>;
> > > >  		clocks = <&input-clk>;
> > > > +		clock-frequency = <100000000>;
> > > >  	};
> > > 
> > > You may check Documentation/devicetree/bindings/clock/clock-bindings.txt
> > > about how to assign initial clock rates, in general 'clock-frequency'
> > > property is a property of clock consumers with two exceptions of simple
> > > clock sources, namely it is used in fixed clock and PWM clock bindings.
> > 
> > I think that's what we agreed on with Rob Herring back in the day.
> > Have you checked this post of him on the topic?
> > https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.infradead.org_pipermail_linux-2Dsnps-2Darc_2017-2DSeptember_002909.html&d=DwIDAw&c=DPL6_
> > X_6JkXFx7AXWqB0tg&r=ZlJN1MriPUTkBKCrPSx67GmaplEUGcAEk9yPtCLdUXI&m=X0W8p5fOjiyVhK1216Lktb5yH3ojTSZhdnQhEiIVj0k&s=yGJfHbjH2T75YeIJLB14_iDjfsKi1E5aaX
> > Yu3QJBUIk&e=
> > 
> > Just FYI it all started from my question here:
> > https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.infradead.org_pipermail_linux-2Dsnps-2Darc_2017-2DSeptember_002900.html&d=DwIDAw&c=DPL6_
> > X_6JkXFx7AXWqB0tg&r=ZlJN1MriPUTkBKCrPSx67GmaplEUGcAEk9yPtCLdUXI&m=X0W8p5fOjiyVhK1216Lktb5yH3ojTSZhdnQhEiIVj0k&s=Jkzt2G_J4aE9JfePPQ57ldnrFWeS57Rhfc
> > Mhun92oU0&e=
> 
> Why can't we use assigned-clock-rates? That would basically call
> clk_set_rate() on the clk once it's added.

Thanks for the hint, assigned-clock-rates works for us.

-- 
 Eugeniy Paltsev