[PATCH 9/9] clocksource: import ARC timer driver

Daniel Lezcano daniel.lezcano at linaro.org
Tue Nov 1 13:42:57 PDT 2016 

On Mon, Oct 31, 2016 at 03:48:16PM -0700, Vineet Gupta wrote:
> Signed-off-by: Vineet Gupta <vgupta at synopsys.com>
> ---
>  MAINTAINERS                                        |  1 +
>  arch/arc/Kconfig                                   | 12 +--------
>  arch/arc/kernel/Makefile                           |  2 +-
>  drivers/clocksource/Kconfig                        | 24 ++++++++++++++++++
>  drivers/clocksource/Makefile                       |  1 +
>  .../time.c => drivers/clocksource/arc_timer.c      | 29 ++++++----------------
>  6 files changed, 35 insertions(+), 34 deletions(-)
>  rename arch/arc/kernel/time.c => drivers/clocksource/arc_timer.c (90%)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3d838cf49f81..57b56ff1dd68 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11632,6 +11632,7 @@ S:	Supported
>  F:	arch/arc/
>  F:	Documentation/devicetree/bindings/arc/*
>  F:	Documentation/devicetree/bindings/interrupt-controller/snps,arc*
> +F:	drivers/clocksource/arc_timer.c
>  F:	drivers/tty/serial/arc_uart.c
>  T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
>  
> diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
> index b4499f97035a..8768a509d5e7 100644
> --- a/arch/arc/Kconfig
> +++ b/arch/arc/Kconfig
> @@ -8,9 +8,9 @@
>  
>  config ARC
>  	def_bool y
> +	select ARC_TIMER
>  	select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
>  	select BUILDTIME_EXTABLE_SORT
> -	select CLKSRC_OF
>  	select CLONE_BACKWARDS
>  	select COMMON_CLK
>  	select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC)
> @@ -410,16 +410,6 @@ config ARC_HAS_DIV_REM
>  	bool "Insn: div, divu, rem, remu"
>  	default y
>  
> -config ARC_TIMER_RTC
> -	bool "Local 64-bit r/o cycle counter"
> -	default n
> -	depends on !SMP
> -
> -config ARC_TIMER_GFRC
> -	bool "SMP synchronized 64-bit cycle counter"
> -	default y
> -	depends on SMP
> -
>  config ARC_NUMBER_OF_INTERRUPTS
>  	int "Number of interrupts"
>  	range 8 240
> diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
> index cfcdedf52ff8..8942c5c3b4c5 100644
> --- a/arch/arc/kernel/Makefile
> +++ b/arch/arc/kernel/Makefile
> @@ -8,7 +8,7 @@
>  # Pass UTS_MACHINE for user_regset definition
>  CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'
>  
> -obj-y	:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
> +obj-y	:= arcksyms.o setup.o irq.o reset.o ptrace.o process.o devtree.o
>  obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o
>  obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
>  obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index e2c6e43cf8ca..73feaadc1924 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -282,6 +282,30 @@ config CLKSRC_MPS2
>  	select CLKSRC_MMIO
>  	select CLKSRC_OF
>  
> +config ARC_TIMER
> +	bool "Enable timers for ARC Cores"
> +	select CLKSRC_OF if OF
> +
> +if ARC_TIMER
> +
> +config ARC_TIMER_RTC
> +	bool "64-bit cycle counter in HS38 cores"
> +	default y if ARC
> +	depends on !SMP
> +	help
> +	  This counter provides 64-bit resolution vs. the 32-bit TIMER1.
> +	  It is implemented inside the core thus can't be used in SMP systems
> +
> +config ARC_TIMER_GFRC
> +	bool "64-bit cycle counter in ARConnect block in HS38x cores"
> +	default y if ARC
> +	depends on SMP
> +	help
> +	  This counter can be used as clocksource in SMP HS38 SoCs.
> +	  It sits outside the core thus can be used in SMP systems
> +
> +endif
> +

Please stay consistent with the rest of the Kconfig.

config ARC_TIMER_RTC
	bool "64-bit cycle counter in HS38 cores" if COMPILE_TEST
	select CLKSRC_OF
	help
	  This counter provides 64-bit resolution vs. the 32-bit TIMER1.
	  It is implemented inside the core thus can't be used in SMP systems.

config ARC_TIMER_GFRC
	bool "64-bit cycle counter in ARConnect block in HS38x cores" if COMPILE_TEST
	select CLKSRC_OF
	help
	  This counter can be used as clocksource in SMP HS38 SoCs.
	  It sits outside the core thus can be used in SMP systems


Then in the ARC's Kconfig you select ARC_TIMER_RTC or ARC_TIMER_GFRC depending
it is SMP or not.

One question:

Why ARC_TIMER_RTC can't be used in a SMP system ? Doesn't have each core its
own clocksource ? It seems you are assuming a clocksource can be used on SMP
only if the clocksource is unique and shared across the cores.


>  config ARM_ARCH_TIMER
>  	bool
>  	select CLKSRC_OF if OF
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index cf87f407f1ad..e78480cb47f4 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -69,3 +69,4 @@ obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
>  obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
>  obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
>  obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o
> +obj-$(CONFIG_ARC_TIMER)			+= arc_timer.o
> diff --git a/arch/arc/kernel/time.c b/drivers/clocksource/arc_timer.c
> similarity index 90%
> rename from arch/arc/kernel/time.c
> rename to drivers/clocksource/arc_timer.c
> index 676b14b7a9be..ec37b6c5e903 100644
> --- a/arch/arc/kernel/time.c
> +++ b/drivers/clocksource/arc_timer.c
> @@ -1,32 +1,18 @@
>  /*
> + * Copyright (C) 2016-17 Synopsys, Inc. (www.synopsys.com)
>   * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
>   *
>   * This program is free software; you can redistribute it and/or modify
>   * it under the terms of the GNU General Public License version 2 as
>   * published by the Free Software Foundation.
> - *
> - * vineetg: Jan 1011
> - *  -sched_clock( ) no longer jiffies based. Uses the same clocksource
> - *   as gtod
> - *
> - * Rajeshwarr/Vineetg: Mar 2008
> - *  -Implemented CONFIG_GENERIC_TIME (rather deleted arch specific code)
> - *   for arch independent gettimeofday()
> - *  -Implemented CONFIG_GENERIC_CLOCKEVENTS as base for hrtimers
> - *
> - * Vineetg: Mar 2008: Forked off from time.c which now is time-jiff.c
>   */
>  
> -/* ARC700 has two 32bit independent prog Timers: TIMER0 and TIMER1
> - * Each can programmed to go from @count to @limit and optionally
> - * interrupt when that happens.
> - * A write to Control Register clears the Interrupt
> - *
> - * We've designated TIMER0 for events (clockevents)
> - * while TIMER1 for free running (clocksource)
> +/* ARC700 has two 32bit independent prog Timers: TIMER0 and TIMER1, Each can be
> + * programmed to go from @count to @limit and optionally interrupt.
> + * We've designated TIMER0 for clockevents and TIMER1 for clocksource
>   *
> - * Newer ARC700 cores have 64bit clk fetching RTSC insn, preferred over TIMER1
> - * which however is currently broken
> + * ARCv2 based HS38 cores have RTC (in-core) and GFRC (inside ARConnect/MCIP)
> + * which are suitable for UP and SMP based clocksources respectively
>   */
>  
>  #include <linux/interrupt.h>
> @@ -37,7 +23,6 @@
>  #include <linux/cpu.h>
>  #include <linux/of.h>
>  #include <linux/of_irq.h>
> -#include <asm/irq.h>
>  
>  #include <soc/arc/timers.h>
>  #include <soc/arc/mcip.h>
> @@ -281,7 +266,7 @@ static irqreturn_t timer_irq_handler(int irq, void *dev_id)
>  	 * irq_set_chip_and_handler() asked for handle_percpu_devid_irq()
>  	 */
>  	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
> -	int irq_reenable = clockevent_state_periodic(evt);
> +	int irq_reenable __maybe_unused = clockevent_state_periodic(evt);
>  
>  	/*
>  	 * Any write to CTRL reg ACks the interrupt, we rewrite the
> -- 
> 2.7.4
>

More information about the linux-snps-arc mailing list