[PATCH 4/4 v7] ASoC: dwc: Add irq parameter to DOCUMENTATION
Jose Abreu
Jose.Abreu at synopsys.com
Mon May 23 03:02:25 PDT 2016
A parameter description for the interruptions of the
I2S controller was added. This interrupt parameter
should only be set when I2S does not have DMA support.
Signed-off-by: Jose Abreu <joabreu at synopsys.com>
Cc: Carlos Palminha <palminha at synopsys.com>
Cc: Mark Brown <broonie at kernel.org>
Cc: Liam Girdwood <lgirdwood at gmail.com>
Cc: Jaroslav Kysela <perex at perex.cz>
Cc: Takashi Iwai <tiwai at suse.com>
Cc: Rob Herring <robh at kernel.org>
Cc: Alexey Brodkin <abrodkin at synopsys.com>
Cc: linux-snps-arc at lists.infradead.org
Cc: alsa-devel at alsa-project.org
Cc: devicetree at vger.kernel.org
Cc: linux-kernel at vger.kernel.org
---
Changes v6 -> v7:
* interrupts is now optional property
No changes v5 -> v6.
Changes v4 -> v5:
* interrupts is now required property
* Drop 'snps-use-dmaengine' property
This patch was only introduced in v4.
Documentation/devicetree/bindings/sound/designware-i2s.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/designware-i2s.txt b/Documentation/devicetree/bindings/sound/designware-i2s.txt
index 7bb5424..6a536d5 100644
--- a/Documentation/devicetree/bindings/sound/designware-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/designware-i2s.txt
@@ -12,6 +12,10 @@ Required properties:
one for receive.
- dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+Optional properties:
+ - interrupts: The interrupt line number for the I2S controller. Add this
+ parameter if the I2S controller that you are using does not support DMA.
+
For more details on the 'dma', 'dma-names', 'clock' and 'clock-names'
properties please check:
* resource-names.txt
--
1.9.1
More information about the linux-snps-arc
mailing list