[PATCH] ARC: axs10x - add Ethernet PHY description in .dts

[Sergei Shtylyov]

Hello.

On 3/15/2016 12:29 PM, Alexey Brodkin wrote:

> Following commit broke DW GMAC functionality on AXS10x boards:
> http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=e34d65696d2ef13dc32f2a162556c86c461ed763
>
> That's what happens on eth0 up:
> --------------------------->8------------------------
> libphy: PHY stmmac-0:ffffffff not found
> eth0: Could not attach to PHY
> stmmac_open: Cannot attach to PHY (error: -19)
> --------------------------->8------------------------
>
> Simplest solution is to add PHY description in board's .dts.
> And so we do here.
>
> Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
> Cc: Rob Herring <robh at kernel.org>
> Cc: Phil Reid <preid at electromag.com.au>
> Cc: David S. Miller <davem at davemloft.net>
> Cc: linux-kernel at vger.kernel.org
> Cc: netdev at vger.kernel.org
> Cc: stable at vger.kernel.org # 4.5.x
> ---
>   arch/arc/boot/dts/axs10x_mb.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
> index 44a578c..04b999e 100644
> --- a/arch/arc/boot/dts/axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/axs10x_mb.dtsi
> @@ -47,6 +47,14 @@
>   			clocks = <&apbclk>;
>   			clock-names = "stmmaceth";
>   			max-speed = <100>;
> +			mdio0 {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				compatible = "snps,dwmac-mdio";
> +				phy0: ethernet-phy at 0 {

    The naming is inconsistent with the "reg" prop specified, should be @1.

MBR, Sergei