ath9k-htc on OHCI -> bogus usb xfer

[Oleksij Rempel]

Hi,

Am 05.07.2016 um 14:20 schrieb Alexey Brodkin:
> Hello,
> 
> Looks like this is another manifestation of already seen problem with ath9k-htc
> and OHCI controller.
> 
> I'm trying to get USB Wi-Fi dongle based on Atheros AR9271 to work with our
> development board (this is Synopsys AXS103) and seeing a picture very similar to
> what was discussed here http://thread.gmane.org/gmane.linux.usb.general/110847
> 
> Below is what I see on insertion of the dongle.
> Note I have the most recent ath9k-htc firmware (see "ath9k_htc/htc_9271-1.4.0.fw"
> in the log below) and Linux kernel is 4.6.3 (latest stable as of today) but the same
> happens even on 4.4.
> 
> Interesting enough if I simply remove or disable the warning like that
> ------------------------>8---------------------------
> diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
> index 3d27477..a317e1e 100644
> --- a/drivers/usb/core/urb.c
> +++ b/drivers/usb/core/urb.c
> @@ -443,11 +443,6 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
>          * cause problems in HCDs if they get it wrong.
>          */
>  
> -       /* Check that the pipe's type matches the endpoint's type */
> -       if (usb_pipetype(urb->pipe) != pipetypes[xfertype])
> -               dev_WARN(&dev->dev, "BOGUS urb xfer, pipe %x != type %x\n",
> -                       usb_pipetype(urb->pipe), pipetypes[xfertype]);
> -
>         /* Check against a simple/standard policy */
>         allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_INTERRUPT | URB_DIR_MASK |
>                         URB_FREE_BUFFER);
> ------------------------>8---------------------------
> everything seem to work quite nice.
> 
> Any thoughts are much appreciated.
> 
> That's the log itself:
> ------------------------>8---------------------------
> usb 1-1: new full-speed USB device number 2 using ohci-platform
> usb 1-1: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
> usb 1-1: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404
> usb 1-1: BOGUS urb xfer, pipe 1 != type 3
> Modules linked in:
> CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 4.6.3 #10
> Workqueue: events request_firmware_work_func
> 
> Stack Trace:
>   arc_unwind_core.constprop.1+0x94/0x10c
> ---[ end trace 2249b79eac9991d1 ]---
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404
> usb 1-1: BOGUS urb xfer, pipe 1 != type 3
> Modules linked in:
> CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G        W       4.6.3 #10
> Workqueue: events request_firmware_work_func
> 
> Stack Trace:
>   arc_unwind_core.constprop.1+0x94/0x10c
> ---[ end trace 2249b79eac9991d2 ]---
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 4 at drivers/usb/core/urb.c:450 usb_submit_urb+0x162/0x404
> usb 1-1: BOGUS urb xfer, pipe 1 != type 3
> Modules linked in:
> CPU: 0 PID: 4 Comm: kworker/0:0 Tainted: G        W       4.6.3 #10
> Workqueue: events request_firmware_work_func
> 
> Stack Trace:
>   arc_unwind_core.constprop.1+0x94/0x10c
> ---[ end trace 2249b79eac9991d3 ]---
> 


please send content of hif_usb_send_regout() from your source code.
It is located in drivers/net/wireless/ath/ath9k/hif_usb.c


-- 
Regards,
Oleksij

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 213 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-snps-arc/attachments/20160705/2dd279e2/attachment.sig>