[PATCH v6 2/2] add new platform driver for PCI RC

Bjorn Helgaas helgaas at kernel.org
Fri Jan 29 12:36:40 PST 2016


Hi Joao,

This is getting pretty close.  I have a few comments below.  This is a
new driver, with no chance of breaking anything else, so I think we
can still get it in for v4.5.

Bjorn

On Thu, Jan 14, 2016 at 11:04:33AM +0000, Joao Pinto wrote:
> This patch adds a new driver that will be the reference platform driver
> for all PCI RC IP Protoyping Kits based on ARC SDP.
> This patch is composed by:
> 
> -Changes to pcie-designware driver add a function that enables the
> feature of starting the LTSSM (Link Train Status State) used by the
> new driver
> -MAINTAINERS file was updated to include the new driver
> -Documentation/devicetree/bindings/pci was updated to include the new
> driver documentation
> -New driver called pcie-snpsdev
> 
> Signed-off-by: Joao Pinto <jpinto at synopsys.com>
> ---
> Change v5 -> v6:
> - Nothing changed (just to keep up with patch set version).
> Change v4 -> v5:
> - Nothing changed (just to keep up with patch set version).
> Changes v3 -> v4 (Bjorn Helgaas):
> - ARCH dependencies were added to the drivers/pci/host/kconfig for the
> PCIE_SNPSDEV.
> Changes v2 -> v3 (Bjorn Helgaas):
> - link init stuff was moved to a snpsdev_pcie_establish_link() function in
> pcie-snpsdev
> - pcie-snpsdev driver declaration was changed to be more 
> standard (Bjorn Helgaas)
> - pcie-designware' dw_pcie_link_retrain() now use standard registers from
> pci-regs.h (Bjorn Helgaas)
> - pcie-snpsdev.txt was complemented with more info (Mark Rutland)
> Changes v1 -> v2 (Bjorn Helgaas):
> - Fixups snpsdev_pcie_fixup_bridge() and snpsdev_pcie_fixup_res() were removed
> from the driver (these functions were for specific tests only and not usefull
> in mainline)
> - Driver' comments were reviewed (fix Typos and excessive comments removal)
> - Removed unnecessary definitions in the driver source (PCIE_PHY_CTRL and
> PCIE_PHY_STAT)
> 
>  .../devicetree/bindings/pci/pcie-snpsdev.txt       |  33 +++
>  MAINTAINERS                                        |   7 +
>  drivers/pci/host/Kconfig                           |   8 +
>  drivers/pci/host/Makefile                          |   1 +
>  drivers/pci/host/pcie-designware.c                 |   9 +
>  drivers/pci/host/pcie-designware.h                 |   1 +
>  drivers/pci/host/pcie-snpsdev.c                    | 286 +++++++++++++++++++++
>  7 files changed, 345 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
>  create mode 100644 drivers/pci/host/pcie-snpsdev.c
> 
> diff --git a/Documentation/devicetree/bindings/pci/pcie-snpsdev.txt b/Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
> new file mode 100644
> index 0000000..cae548b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
> @@ -0,0 +1,33 @@
> +Synopsys PCI RC IP Prototyping Kit
> +----------------------------------
> +
> +This is the reference platform driver to be used in the Synopsys PCI Root
> +Complex IP Prototyping Kit.
> +
> +Required properties:
> +- compatible: set to "snps,pcie-snpsdev";
> +- reg: base address and length of the pcie controller registers.
> +- #address-cells: set to <3>
> +- #size-cells: set to <2>
> +- device_type: set to "pci"
> +- ranges: ranges for the PCI memory and I/O regions.
> +- interrupts: one interrupt source for MSI interrupts, followed by interrupt
> +	source for hardware related interrupts.
> +- #interrupt-cells: set to <1>
> +- num-lanes: set to <1>;
> +
> +Example configuration:
> +
> +	pcie: pcie at 0xdffff000 {
> +		compatible = "snps,pcie-snpsdev";
> +		reg = <0xdffff000 0x1000>;
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		device_type = "pci";
> +		ranges = <0x00000800 0 0xd0000000 0xd0000000 0 0x00002000>,
> +			 <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
> +			 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
> +		interrupts = <25>, <24>;
> +		#interrupt-cells = <1>;
> +		num-lanes = <1>;
> +	};

Can we get an ack from the DT guys for this?

Is "snpsdev" an already-established abbreviation?  The "dev" part
seems obvious and maybe could go without saying.  This would look
nicer if we could just use "synopsis" everywhere you have "snpsdev" --
DT compatible string, filename, function names, etc.

> diff --git a/MAINTAINERS b/MAINTAINERS
> index e9caa4b..d2e4506 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8230,6 +8230,13 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
>  F:	drivers/pci/host/pcie-hisi.c
>  
> +PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
> +M:	Joao Pinto <jpinto at synopsys.com>
> +L:	linux-pci at vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
> +F:	drivers/pci/host/pcie-snpsdev.c
> +
>  PCMCIA SUBSYSTEM
>  P:	Linux PCMCIA Team
>  L:	linux-pcmcia at lists.infradead.org
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index f131ba9..589bc15 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -172,4 +172,12 @@ config PCI_HISI
>  	help
>  	  Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
>  
> +config PCIE_SNPSDEV
> +	bool "Platform Driver for Synopsys Device"
> +	depends on ARC && OF
> +	select PCIEPORTBUS
> +	select PCIE_DW
> +	help
> +	  Say Y here if you want to enable PCIe controller support on the
> +	  Synopsys IP Prototyping Kits.
>  endmenu
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 9d4d3c6..e422f65 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -20,3 +20,4 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
>  obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
>  obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
>  obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
> +obj-$(CONFIG_PCIE_SNPSDEV) += pcie-snpsdev.o
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 540f077..f73a3cf 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -706,6 +706,15 @@ static struct pci_ops dw_pcie_ops = {
>  	.write = dw_pcie_wr_conf,
>  };
>  
> +void dw_pcie_link_retrain(struct pcie_port *pp)
> +{
> +	u32 val = 0;
> +
> +	dw_pcie_readl_rc(pp, PCI_EXP_LNKCTL+0x70, &val);
> +	val = val | PCI_EXP_LNKCTL_RL;
> +	dw_pcie_writel_rc(pp, val, PCI_EXP_LNKCTL+0x70);
> +}

It seems odd that you need to add this.  Please split it into a
separate patch and we can get the DW guys to ack it.

> +
>  void dw_pcie_setup_rc(struct pcie_port *pp)
>  {
>  	u32 val;
> diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
> index 2356d29..249b631 100644
> --- a/drivers/pci/host/pcie-designware.h
> +++ b/drivers/pci/host/pcie-designware.h
> @@ -79,5 +79,6 @@ void dw_pcie_msi_init(struct pcie_port *pp);
>  int dw_pcie_link_up(struct pcie_port *pp);
>  void dw_pcie_setup_rc(struct pcie_port *pp);
>  int dw_pcie_host_init(struct pcie_port *pp);
> +void dw_pcie_link_retrain(struct pcie_port *pp);
>  
>  #endif /* _PCIE_DESIGNWARE_H */
> diff --git a/drivers/pci/host/pcie-snpsdev.c b/drivers/pci/host/pcie-snpsdev.c
> new file mode 100644
> index 0000000..4ca7ec5
> --- /dev/null
> +++ b/drivers/pci/host/pcie-snpsdev.c
> @@ -0,0 +1,286 @@
> +/*
> + * PCIe RC driver for Synopsys Designware Core
> + *
> + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * Authors: Manjunath Bettegowda <manjumb at synopsys.com>,
> + *	    Jie Deng <jiedeng at synopsys.com>
> + *	    Joao Pinto <jpinto at synopsys.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/gpio.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/resource.h>
> +#include <linux/signal.h>
> +#include <linux/types.h>
> +
> +#include "pcie-designware.h"
> +
> +#define to_snpsdev_pcie(x)	container_of(x, struct snpsdev_pcie, pp)
> +
> +struct snpsdev_pcie {
> +	void __iomem		*mem_base; /* Memory Base to access Core's [RC]
> +					    * Config Space Layout
> +					    */
> +	struct pcie_port	pp;        /* RC Root Port specific structure -
> +					    * DWC_PCIE_RC stuff
> +					    */
> +};
> +
> +#define PCI_EQUAL_CONTROL_PHY 0x00000707
> +
> +/* PCIe Port Logic registers (memory-mapped) */
> +#define PLR_OFFSET 0x700
> +#define PCIE_PHY_DEBUG_R0 (PLR_OFFSET + 0x28) /* 0x728 */
> +#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) /* 0x72c */
> +
> +/* This handler was created for future work */
> +static irqreturn_t snpsdev_pcie_irq_handler(int irq, void *arg)
> +{
> +	return IRQ_NONE;
> +}
> +
> +static irqreturn_t snpsdev_pcie_msi_irq_handler(int irq, void *arg)
> +{
> +	struct pcie_port *pp = arg;
> +
> +	dw_handle_msi_irq(pp);
> +
> +	return IRQ_HANDLED;

I think this should be

  return dw_handle_msi_irq(pp);

as it is in other DW-based drivers (or there should be a comment about
why this needs to be different).

> +}
> +
> +static void snpsdev_pcie_init_phy(struct pcie_port *pp)
> +{
> +	/* write Lane 0 Equalization Control fields register */
> +	writel(PCI_EQUAL_CONTROL_PHY, pp->dbi_base + 0x154);
> +}
> +
> +static int snpsdev_pcie_deassert_core_reset(struct pcie_port *pp)
> +{
> +	return 0;
> +}
> +
> +static void snpsdev_pcie_establish_link(struct pcie_port *pp)
> +{
> +	int count = 0;
> +
> +	/* Initialize Phy (Reset/poweron/control-inputs ) */
> +	snpsdev_pcie_init_phy(pp);
> +
> +	/* de-assert core reset */

Superfluous comment, since the function name repeats exactly the same
thing.  The one above is probably superfluous, too.

> +	snpsdev_pcie_deassert_core_reset(pp);
> +
> +	/* We expect the PCIe Link to be up by this time */

Is the comment really true?  It seems strange to retrain the link
below if you expect it to already be up before you even call
dw_pcie_setup_rc().

> +	dw_pcie_setup_rc(pp);

I count 7 existing callers of dw_pcie_setup_rc().  4 are from
*_pcie_host_init(), and 3 are from *_pcie_establish_link().  Let's
follow the trend by doing the things above in
snpsdev_pcie_host_init().  Unless there's a *reason* to be different,
I want all these DW-based drivers to look as much alike as possible.

> +
> +	/* Start LTSSM here */
> +	dw_pcie_link_retrain(pp);

What's different about this system that means you require this
link_retrain() interface, when all the other drivers don't?

> +
> +	while (!dw_pcie_link_up(pp)) {
> +		usleep_range(1000, 1100);
> +		count++;
> +		if (count == 20) {
> +			dev_err(pp->dev, "phy link never came up\n");
> +			dev_dbg(pp->dev,
> +				"PL_DEBUG0: 0x%08x, DEBUG_R1: 0x%08x\n",
> +				readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
> +				readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
> +			break;
> +		}
> +	}

Can you look at the other DW-based drivers and copy their "wait for
link up" code?  This is basically similar, but again, doing it
"basically similar but slightly different" just makes work and errors.

> +}
> +
> +/*
> + * snpsdev_pcie_host_init()
> + * Platform specific host/RC initialization
> + *	a. Assert the core reset
> + *	b. Assert and deassert phy reset and initialize the phy
> + *	c. De-Assert the core reset
> + *	d. Initializet the Root Port (BARs/Memory Or IO/ Interrupt/ Commnad Reg)
> + *	e. Initiate Link startup procedure
> + *
> + */
> +static void snpsdev_pcie_host_init(struct pcie_port *pp)
> +{
> +	/* Establish link */

Superfluous comment.

> +	snpsdev_pcie_establish_link(pp);
> +
> +	if (IS_ENABLED(CONFIG_PCI_MSI))
> +		dw_pcie_msi_init(pp);
> +}
> +
> +static int snpsdev_pcie_link_up(struct pcie_port *pp)
> +{
> +	u32 status;
> +
> +	/* Bit number 36: reports LTSSM PHY Link UP; Available in bit 3 of
> +	 * PCIE_PHY_DEBUG_R1
> +	 */
> +	status = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << 4);
> +	if (status != 0)
> +		return 1;

This would be easier to read as something like:

  #define PCIE_PHY_DEBUG_R1_LINK_UP 0x00000010

  val = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
  return val & PCIE_PHY_DEBUG_R1_LINK_UP;

> +
> +	/* TODO:Now Link is in L0;Initiate GEN2/GEN3 migration if RC Supports*/
> +	return 0;
> +}
> +
> +/**
> + * This is RC operation structure
> + * snpsdev_pcie_link_up: the function which initiates the phy link up procedure
> + * snpsdev_pcie_host_init: the function which does the host/RC Root port
> + * initialization.
> + */
> +static struct pcie_host_ops snpsdev_pcie_host_ops = {
> +	.link_up = snpsdev_pcie_link_up,
> +	.host_init = snpsdev_pcie_host_init,
> +};
> +
> +/**
> + * snpsdev_add_pcie_port
> + * This function
> + * a. installs the interrupt handler
> + * b. registers host operations in the pcie_port structure
> + */
> +static int snpsdev_add_pcie_port(struct pcie_port *pp,
> +				 struct platform_device *pdev)
> +{
> +	int ret;
> +
> +	pp->irq = platform_get_irq(pdev, 1);
> +
> +	if (pp->irq < 0) {
> +		if (pp->irq != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "cannot get irq\n");

Hmmm...  I don't really understand this EPROBE_DEFER stuff.  Most
callers of platform_get_irq() don't check for it explicitly (and
*none* of the DW-based drivers does), so I hope it's not something
drivers are supposed to do something special with.  In this case, the
only difference is makes is whether you print a message, so my advice
is to just print the message unconditionally if platform_get_irq()
fails for any reason.

> +		return pp->irq;
> +	}
> +
> +	ret = devm_request_irq(&pdev->dev, pp->irq, snpsdev_pcie_irq_handler,
> +				IRQF_SHARED, "snpsdev-pcie", pp);
> +
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to request irq\n");
> +		return ret;
> +	}
> +
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		pp->msi_irq = platform_get_irq(pdev, 0);
> +
> +		if (pp->msi_irq < 0) {
> +			if (pp->msi_irq != -EPROBE_DEFER)
> +				dev_err(&pdev->dev, "cannot get msi irq\n");

Same here.

> +			return pp->msi_irq;
> +		}
> +
> +		ret = devm_request_irq(&pdev->dev, pp->msi_irq,
> +					snpsdev_pcie_msi_irq_handler,
> +					IRQF_SHARED, "snpsdev-pcie-msi", pp);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to request msi irq\n");
> +			return ret;
> +		}
> +	}
> +
> +	pp->root_bus_nr = -1;
> +	pp->ops = &snpsdev_pcie_host_ops;
> +
> +	/* Below function:
> +	 * Checks for range property from DT
> +	 * Gets the IO and MEMORY and CONFIG-Space ranges from DT
> +	 * Does IOREMAPS on the physical addresses
> +	 * Gets the num-lanes from DT
> +	 * Gets MSI capability from DT
> +	 * Calls the platform specific host initialization
> +	 * Program the correct class, BAR0, Link width, in Config space
> +	 * Then it calls pci common init routine
> +	 * Then it calls function to assign "unassigned resources"
> +	 */
> +	ret = dw_pcie_host_init(pp);
> +	if (ret) {
> +		dev_err(&pdev->dev, "failed to initialize host\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * snpsdev_pcie_rc_probe()
> + * This function gets called as part of pcie registration. if the id matches
> + * the platform driver framework will call this function.
> + *
> + * @pdev: Pointer to the platform_device structure
> + *
> + * Returns zero on success; Negative errorno on failure
> + */
> +static int snpsdev_pcie_rc_probe(struct platform_device *pdev)

snpsdev_pcie_probe() (so it follows the pattern of other drivers).

> +{
> +	struct snpsdev_pcie *snpsdev_pcie;
> +	struct pcie_port *pp;
> +	struct resource *dwc_pcie_rc_res;  /* Resource from DT */

"res" would be a good enough name and would avoid line wrapping below.

> +	int ret;
> +
> +	snpsdev_pcie = devm_kzalloc(&pdev->dev, sizeof(*snpsdev_pcie),
> +					GFP_KERNEL);
> +	if (!snpsdev_pcie)
> +		return -ENOMEM;
> +
> +	pp = &snpsdev_pcie->pp;
> +	pp->dev = &pdev->dev;
> +
> +	dwc_pcie_rc_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +
> +	if (!dwc_pcie_rc_res)
> +		return -ENODEV;
> +
> +	snpsdev_pcie->mem_base = devm_ioremap_resource(&pdev->dev,
> +							dwc_pcie_rc_res);
> +	if (IS_ERR(snpsdev_pcie->mem_base)) {
> +		ret = PTR_ERR(snpsdev_pcie->mem_base);
> +		return ret;

  return PTR_ERR(snpsdev_pcie->mem_base);

> +	}
> +	pp->dbi_base = snpsdev_pcie->mem_base;
> +
> +	ret = snpsdev_add_pcie_port(pp, pdev);
> +	if (ret < 0)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, snpsdev_pcie);
> +
> +	return 0;
> +}
> +
> +static int snpsdev_pcie_rc_remove(struct platform_device *pdev)
> +{
> +	return 0;
> +}

This isn't referenced anywhere, so I think you could remove it.

> +static const struct of_device_id snpsdev_pcie_rc_of_match[] = {
> +	{ .compatible = "snps,pcie-snpsdev", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, snpsdev_pcie_rc_of_match);
> +
> +static struct platform_driver snpsdev_pcie_rc_driver = {
> +	.driver = {
> +		.name	= "pcie-snpsdev",
> +		.of_match_table = snpsdev_pcie_rc_of_match,
> +	},
> +	.probe = snpsdev_pcie_rc_probe,
> +};
> +
> +module_platform_driver(snpsdev_pcie_rc_driver);
> +
> +MODULE_AUTHOR("Manjunath Bettegowda <manjumb at synopsys.com>");
> +MODULE_DESCRIPTION("Platform Driver for Synopsys Device");

Should probably mention the PCI connection, e.g., "Synopsys PCIe host
controller driver".

> +MODULE_LICENSE("GPL v2");
> -- 
> 1.8.1.5



More information about the linux-snps-arc mailing list