[PATCH v3 0/2] adding PCI support to AXS10x

[Joao Pinto]

Hi,
I am going to add dependencies to the driver' kconfig to avoid this problem. I
will send you a new patch version today.

Thanks.

On 1/11/2016 2:53 PM, Bjorn Helgaas wrote:
> On Mon, Jan 11, 2016 at 02:31:51PM +0000, Joao Pinto wrote:
>> Hi Bjorn,
>>
>> On 1/8/2016 8:33 PM, Bjorn Helgaas wrote:
>>> Hi Joao,
>>>
>>> On Mon, Dec 21, 2015 at 03:44:14PM +0000, Joao Pinto wrote:
>>>> This patch set has the goal to add suppport for DesignWare PCIe RC in ARC
>>>> AXS10x. It includes the necessary tweaks to the ARC architecture, necessary
>>>> tweaks to the PCI subsystem and a new driver (pcie-snpsdev).
>>>> This new driver will be used extensively in the PCIe RC Prototyping Kit.
>>>>
>>>> The patches were produced against Bjorn Helgaas' repository. It was properly
>>>> tested in an IP Prototyping Kit.
>>>>
>>>> Joao Pinto (2):
>>>>   PCI support added to ARC
>>>>   add new platform driver for PCI RC
>>>>
>>>>  .../devicetree/bindings/pci/pcie-snpsdev.txt       |  33 +++
>>>>  MAINTAINERS                                        |   7 +
>>>>  arch/arc/Kconfig                                   |  23 ++
>>>>  arch/arc/include/asm/dma.h                         |   5 +
>>>>  arch/arc/include/asm/io.h                          |  10 +
>>>>  arch/arc/include/asm/pci.h                         |  43 ++++
>>>>  arch/arc/kernel/Makefile                           |   1 +
>>>>  arch/arc/kernel/pcibios.c                          |  55 ++++
>>>>  arch/arc/mm/ioremap.c                              |  10 +-
>>>>  arch/arc/plat-axs10x/Kconfig                       |   1 +
>>>>  drivers/pci/Makefile                               |   1 +
>>>>  drivers/pci/host/Kconfig                           |   5 +
>>>>  drivers/pci/host/Makefile                          |   1 +
>>>>  drivers/pci/host/pcie-designware.c                 |  11 +
>>>>  drivers/pci/host/pcie-designware.h                 |   1 +
>>>>  drivers/pci/host/pcie-snpsdev.c                    | 286 +++++++++++++++++++++
>>>>  16 files changed, 492 insertions(+), 1 deletion(-)
>>>>  create mode 100644 Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
>>>>  create mode 100644 arch/arc/include/asm/pci.h
>>>>  create mode 100644 arch/arc/kernel/pcibios.c
>>>>  create mode 100644 drivers/pci/host/pcie-snpsdev.c
>>>
>>> This failed the kbuild test, so I'm waiting for a refresh to fix that.
>>
>> Just checked the kbuild robot error and it is happening in ARC git tree when
>> built for i386 arch and the problem is independent from my patches. The build
>> error is the following:
>>
>>    drivers/pci/host/pcie-designware.c: In function 'dw_pcie_host_init':
>>>> drivers/pci/host/pcie-designware.c:556:7: error: implicit declaration of function
>> 'pci_has_flag' [-Werror=implicit-function-declaration]
>>      if (!pci_has_flag(PCI_PROBE_ONLY)) {
>>           ^
>>>> drivers/pci/host/pcie-designware.c:556:20: error: 'PCI_PROBE_ONLY' undeclared
>> (first use in
>> this function)
>>      if (!pci_has_flag(PCI_PROBE_ONLY)) {
>>                        ^
>> This problem has been already identified by Stephen Rothwell as you can see in
>> the following mailing list thread:
>>
>> http://www.gossamer-threads.com/lists/linux/kernel/2341200
> 
> Stephen saw that problem while building the Qualcomm driver
> (CONFIG_PCIE_QCOM), and we fixed it by changing Kconfig so we won't build
> that driver on x86.
> 
> That fix only affects CONFIG_PCIE_QCOM, so it won't help your driver.
> 
> You need some improvements to your drivers/pci/host/Kconfig patch -- some
> help text and probably some dependencies.
> 
> Bjorn
>