[PATCH 1/2 v6] clk/axs10x: Add I2S PLL clock driver
Jose Abreu
Jose.Abreu at synopsys.com
Thu Apr 21 10:55:35 PDT 2016
Adding device tree mailing list and Rob Herring.
On 21-04-2016 18:19, Jose Abreu wrote:
> The ARC SDP I2S clock can be programmed using a
> specific PLL.
>
> This patch has the goal of adding a clock driver
> that programs this PLL.
>
> At this moment the rate values are hardcoded in
> a table but in the future it would be ideal to
> use a function which determines the PLL values
> given the desired rate.
>
> Signed-off-by: Jose Abreu <joabreu at synopsys.com>
> ---
>
> Changes v5 -> v6:
> * Use parent clock to determine PLL input rate instead of using hardcoded values
> * Documentation update (added 'clocks' field)
>
> Changes v4 -> v5:
> * Documentation update (as suggested by Alexey Brodkin)
> * Changed compatible string to "snps,axs10x-i2s-pll-clock" (as suggested by Alexey Brodkin)
>
> Changes v3 -> v4:
> * Added binding document (as suggested by Stephen Boyd)
> * Minor code style fixes (as suggested by Stephen Boyd)
> * Use ioremap (as suggested by Stephen Boyd)
> * Implement round_rate (as suggested by Stephen Boyd)
> * Change to platform driver (as suggested by Stephen Boyd)
> * Use {readl/writel}_relaxed (as suggested by Vineet Gupta)
>
> Changes v2 -> v3:
> * Implemented recalc_rate
>
> Changes v1 -> v2:
> * Renamed folder to axs10x (as suggested by Alexey Brodkin)
> * Added more supported rates
>
> .../bindings/clock/axs10x-i2s-pll-clock.txt | 25 +++
> drivers/clk/Makefile | 1 +
> drivers/clk/axs10x/Makefile | 1 +
> drivers/clk/axs10x/i2s_pll_clock.c | 228 +++++++++++++++++++++
> 4 files changed, 255 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt
> create mode 100644 drivers/clk/axs10x/Makefile
> create mode 100644 drivers/clk/axs10x/i2s_pll_clock.c
>
> diff --git a/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt
> new file mode 100644
> index 0000000..5ffc8df
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/axs10x-i2s-pll-clock.txt
> @@ -0,0 +1,25 @@
> +Binding for the AXS10X I2S PLL clock
> +
> +This binding uses the common clock binding[1].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +Required properties:
> +- compatible: shall be "snps,axs10x-i2s-pll-clock"
> +- reg : address and length of the I2S PLL register set.
> +- clocks: shall be the input parent clock phandle for the PLL.
> +- #clock-cells: from common clock binding; Should always be set to 0.
> +
> +Example:
> + pll_clock: pll_clock {
> + compatible = "fixed-clock";
> + clock-frequency = <27000000>;
> + #clock-cells = <0>;
> + };
> +
> + i2s_clock at 100a0 {
> + compatible = "snps,axs10x-i2s-pll-clock";
> + reg = <0x100a0 0x10>;
> + clocks = <&pll_clock>;
> + #clock-cells = <0>;
> + };
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index 46869d6..2ca62dc6 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -84,3 +84,4 @@ obj-$(CONFIG_X86) += x86/
> obj-$(CONFIG_ARCH_ZX) += zte/
> obj-$(CONFIG_ARCH_ZYNQ) += zynq/
> obj-$(CONFIG_H8300) += h8300/
> +obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/
> diff --git a/drivers/clk/axs10x/Makefile b/drivers/clk/axs10x/Makefile
> new file mode 100644
> index 0000000..01996b8
> --- /dev/null
> +++ b/drivers/clk/axs10x/Makefile
> @@ -0,0 +1 @@
> +obj-y += i2s_pll_clock.o
> diff --git a/drivers/clk/axs10x/i2s_pll_clock.c b/drivers/clk/axs10x/i2s_pll_clock.c
> new file mode 100644
> index 0000000..411310d
> --- /dev/null
> +++ b/drivers/clk/axs10x/i2s_pll_clock.c
> @@ -0,0 +1,228 @@
> +/*
> + * Synopsys AXS10X SDP I2S PLL clock driver
> + *
> + * Copyright (C) 2016 Synopsys
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/clk-provider.h>
> +#include <linux/err.h>
> +#include <linux/device.h>
> +#include <linux/of_address.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +
> +/* PLL registers addresses */
> +#define PLL_IDIV_REG 0x0
> +#define PLL_FBDIV_REG 0x4
> +#define PLL_ODIV0_REG 0x8
> +#define PLL_ODIV1_REG 0xC
> +
> +struct i2s_pll_cfg {
> + unsigned int rate;
> + unsigned int idiv;
> + unsigned int fbdiv;
> + unsigned int odiv0;
> + unsigned int odiv1;
> +};
> +
> +static const struct i2s_pll_cfg i2s_pll_cfg_27m[] = {
> + /* 27 Mhz */
> + { 1024000, 0x104, 0x451, 0x10E38, 0x2000 },
> + { 1411200, 0x104, 0x596, 0x10D35, 0x2000 },
> + { 1536000, 0x208, 0xA28, 0x10B2C, 0x2000 },
> + { 2048000, 0x82, 0x451, 0x10E38, 0x2000 },
> + { 2822400, 0x82, 0x596, 0x10D35, 0x2000 },
> + { 3072000, 0x104, 0xA28, 0x10B2C, 0x2000 },
> + { 2116800, 0x82, 0x3CF, 0x10C30, 0x2000 },
> + { 2304000, 0x104, 0x79E, 0x10B2C, 0x2000 },
> + { 0, 0, 0, 0, 0 },
> +};
> +
> +static const struct i2s_pll_cfg i2s_pll_cfg_28m[] = {
> + /* 28.224 Mhz */
> + { 1024000, 0x82, 0x105, 0x107DF, 0x2000 },
> + { 1411200, 0x28A, 0x1, 0x10001, 0x2000 },
> + { 1536000, 0xA28, 0x187, 0x10042, 0x2000 },
> + { 2048000, 0x41, 0x105, 0x107DF, 0x2000 },
> + { 2822400, 0x145, 0x1, 0x10001, 0x2000 },
> + { 3072000, 0x514, 0x187, 0x10042, 0x2000 },
> + { 2116800, 0x514, 0x42, 0x10001, 0x2000 },
> + { 2304000, 0x619, 0x82, 0x10001, 0x2000 },
> + { 0, 0, 0, 0, 0 },
> +};
> +
> +struct i2s_pll_clk {
> + void __iomem *base;
> + struct clk_hw hw;
> + struct device *dev;
> +};
> +
> +static inline void i2s_pll_write(struct i2s_pll_clk *clk, unsigned int reg,
> + unsigned int val)
> +{
> + writel_relaxed(val, clk->base + reg);
> +}
> +
> +static inline unsigned int i2s_pll_read(struct i2s_pll_clk *clk,
> + unsigned int reg)
> +{
> + return readl_relaxed(clk->base + reg);
> +}
> +
> +static inline struct i2s_pll_clk *to_i2s_pll_clk(struct clk_hw *hw)
> +{
> + return container_of(hw, struct i2s_pll_clk, hw);
> +}
> +
> +static inline unsigned int i2s_pll_get_value(unsigned int val)
> +{
> + return (val & 0x3F) + ((val >> 6) & 0x3F);
> +}
> +
> +static const struct i2s_pll_cfg *i2s_pll_get_cfg(unsigned long prate)
> +{
> + switch (prate) {
> + case 27000000:
> + return i2s_pll_cfg_27m;
> + case 28224000:
> + return i2s_pll_cfg_28m;
> + default:
> + return NULL;
> + }
> +}
> +
> +static unsigned long i2s_pll_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct i2s_pll_clk *clk = to_i2s_pll_clk(hw);
> + unsigned int idiv, fbdiv, odiv;
> +
> + idiv = i2s_pll_get_value(i2s_pll_read(clk, PLL_IDIV_REG));
> + fbdiv = i2s_pll_get_value(i2s_pll_read(clk, PLL_FBDIV_REG));
> + odiv = i2s_pll_get_value(i2s_pll_read(clk, PLL_ODIV0_REG));
> +
> + return ((parent_rate / idiv) * fbdiv) / odiv;
> +}
> +
> +static long i2s_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + struct i2s_pll_clk *clk = to_i2s_pll_clk(hw);
> + const struct i2s_pll_cfg *pll_cfg = i2s_pll_get_cfg(*prate);
> + int i;
> +
> + if (!pll_cfg) {
> + dev_err(clk->dev, "invalid parent rate=%ld\n", *prate);
> + return -EINVAL;
> + }
> +
> + for (i = 0; pll_cfg[i].rate != 0; i++)
> + if (pll_cfg[i].rate == rate)
> + return rate;
> +
> + return -EINVAL;
> +}
> +
> +static int i2s_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct i2s_pll_clk *clk = to_i2s_pll_clk(hw);
> + const struct i2s_pll_cfg *pll_cfg = i2s_pll_get_cfg(parent_rate);
> + int i;
> +
> + if (!pll_cfg) {
> + dev_err(clk->dev, "invalid parent rate=%ld\n", parent_rate);
> + return -EINVAL;
> + }
> +
> + for (i = 0; pll_cfg[i].rate != 0; i++) {
> + if (pll_cfg[i].rate == rate) {
> + i2s_pll_write(clk, PLL_IDIV_REG, pll_cfg[i].idiv);
> + i2s_pll_write(clk, PLL_FBDIV_REG, pll_cfg[i].fbdiv);
> + i2s_pll_write(clk, PLL_ODIV0_REG, pll_cfg[i].odiv0);
> + i2s_pll_write(clk, PLL_ODIV1_REG, pll_cfg[i].odiv1);
> + return 0;
> + }
> + }
> +
> + dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate,
> + parent_rate);
> + return -EINVAL;
> +}
> +
> +static const struct clk_ops i2s_pll_ops = {
> + .recalc_rate = i2s_pll_recalc_rate,
> + .round_rate = i2s_pll_round_rate,
> + .set_rate = i2s_pll_set_rate,
> +};
> +
> +static int i2s_pll_clk_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->of_node;
> + const char *clk_name;
> + const char *parent_name;
> + struct clk *clk;
> + struct i2s_pll_clk *pll_clk;
> + struct clk_init_data init;
> + struct resource *mem;
> +
> + pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL);
> + if (!pll_clk)
> + return -ENOMEM;
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + pll_clk->base = devm_ioremap_resource(dev, mem);
> + if (IS_ERR(pll_clk->base))
> + return PTR_ERR(pll_clk->base);
> +
> + clk_name = node->name;
> + init.name = clk_name;
> + init.ops = &i2s_pll_ops;
> + parent_name = of_clk_get_parent_name(node, 0);
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + pll_clk->hw.init = &init;
> + pll_clk->dev = dev;
> +
> + clk = devm_clk_register(dev, &pll_clk->hw);
> + if (IS_ERR(clk)) {
> + dev_err(dev, "failed to register %s clock (%ld)\n",
> + clk_name, PTR_ERR(clk));
> + return PTR_ERR(clk);
> + }
> +
> + return of_clk_add_provider(node, of_clk_src_simple_get, clk);
> +}
> +
> +static int i2s_pll_clk_remove(struct platform_device *pdev)
> +{
> + of_clk_del_provider(pdev->dev.of_node);
> + return 0;
> +}
> +
> +static const struct of_device_id i2s_pll_clk_id[] = {
> + { .compatible = "snps,axs10x-i2s-pll-clock", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, i2s_pll_clk_id);
> +
> +static struct platform_driver i2s_pll_clk_driver = {
> + .driver = {
> + .name = "axs10x-i2s-pll-clock",
> + .of_match_table = i2s_pll_clk_id,
> + },
> + .probe = i2s_pll_clk_probe,
> + .remove = i2s_pll_clk_remove,
> +};
> +module_platform_driver(i2s_pll_clk_driver);
> +
> +MODULE_AUTHOR("Jose Abreu <joabreu at synopsys.com>");
> +MODULE_DESCRIPTION("Synopsys AXS10X SDP I2S PLL Clock Driver");
> +MODULE_LICENSE("GPL v2");
More information about the linux-snps-arc
mailing list