[PATCH v4 1/5] ARC: clockevent: DT based probe

[Vineet Gupta]

On Wednesday 13 April 2016 06:29 PM, Daniel Lezcano wrote:
> On Wed, Apr 13, 2016 at 05:10:01PM +0530, Vineet Gupta wrote:
>>  - timer frequency is derived from DT (no longer rely on top level
>>    DT "clock-frequency" probed early and exported by asm/clk.h)
>>
>>  - TIMER0_IRQ need not be exported across arch code, confined to intc as
>>    it is property of same
>>
>> Cc: Daniel Lezcano <daniel.lezcano at linaro.org>
>> Signed-off-by: Vineet Gupta <vgupta at synopsys.com>
>> ---
> 
> [ ... ]
> 
>> +static void noinline arc_get_timer_clk(struct device_node *node)
>> +{
>> +	struct clk *clk;
>> +	int ret;
>> +
>> +	clk = of_clk_get(node, 0);
>> +	if (IS_ERR(clk))
>> +		panic("Can't get timer clock");
>> +
> 
> Don't panic here. Change the function to return an error and let the
> caller to handle it.
> 
>> +	ret = clk_prepare_enable(clk);
>> +	if (ret)
>> +		pr_err("Couldn't enable parent clock\n");

I suppose we need to return here too ?

>> +
>> +	arc_timer_freq = clk_get_rate(clk);
>> +}
>> +
> 
> [ ... ]
> 
>> +static void __init arc_clockevent_setup(struct device_node *node)
>>  {
>>  	struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
>>  	int ret;
>>  
>>  	register_cpu_notifier(&arc_timer_cpu_nb);
>>  
>> +	arc_timer_irq = irq_of_parse_and_map(node, 0);
>> +	if (arc_timer_irq <= 0)
>> +		panic("Can't parse IRQ");
>> +
>> +	arc_get_timer_clk(node);
> 
> Connected to the comment above, check the return code.

Right and if there's error, bail from here too ? This will leave a system w/o a
working clockevent and our lpj setup loop will spin forever. Better to add a WARN
so that user knows to fix his DT.

> 
>> +
>> +	evt->irq = arc_timer_irq;
>>  	evt->cpumask = cpumask_of(smp_processor_id());
>> -	clockevents_config_and_register(evt, arc_get_core_freq(),
>> +	clockevents_config_and_register(evt, arc_timer_freq,
>>  					0, ARC_TIMER_MAX);
>>  
>>  	/* Needs apriori irq_set_percpu_devid() done in intc map function */
>> @@ -291,6 +312,7 @@ static void __init arc_clockevent_setup(void)
>>  
>>  	enable_percpu_irq(arc_timer_irq, 0);
>>  }
>> +CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer", arc_clockevent_setup);
>>  
>>  /*
>>   * Called from start_kernel() - boot CPU only
>> @@ -299,7 +321,6 @@ static void __init arc_clockevent_setup(void)
>>   * -Also sets up any global state needed for timer subsystem:
>>   *    - for "counting" timer, registers a clocksource, usable across CPUs
>>   *      (provided that underlying counter h/w is synchronized across cores)
>> - *    - for "event" timer, sets up TIMER0 IRQ (as that is platform agnostic)
>>   */
>>  void __init time_init(void)
>>  {
>> @@ -315,7 +336,5 @@ void __init time_init(void)
>>  		 * CLK upto 4.29 GHz can be safely represented in 32 bits
>>  		 * because Max 32 bit number is 4,294,967,295
>>  		 */
>> -		clocksource_register_hz(&arc_counter, arc_get_core_freq());
>> -
>> -	arc_clockevent_setup();
>> +		clocksource_register_hz(&arc_counter, arc_timer_freq);
>>  }
>> -- 
>> 2.5.0
>>
>