[PATCH 1/3 v2] drm/i2c/adv7511: Add audio support
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Tue Apr 5 09:03:55 PDT 2016
Hi Jose,
On Tuesday 05 Apr 2016 12:00:54 Jose Abreu wrote:
> On 04-04-2016 22:41, Laurent Pinchart wrote:
> > On Monday 04 Apr 2016 10:05:39 Jose Abreu wrote:
> >> On 01-04-2016 18:10, Laurent Pinchart wrote:
> >>> On Monday 28 Mar 2016 15:36:09 Jose Abreu wrote:
> >>>> This patch adds audio support for the ADV7511 HDMI transmitter
> >>>> using ALSA SoC.
> >>>>
> >>>> The code was ported from Analog Devices linux tree from
> >>>> commit 1770c4a1e32b ("Merge remote-tracking branch
> >>>>
> >>>> 'xilinx/master' into xcomm_zynq"), which is available at:
> >>>> - https://github.com/analogdevicesinc/linux/
> >>>>
> >>>> The main core file was renamed from adv7511.c to adv7511_core.c
> >>>> so that audio and video compile into a single adv7511.ko module
> >>>> and to keep up with Analog Devices kernel tree.
> >>>>
> >>>> The audio can be disabled using menu-config so it is possible
> >>>> to use only video mode.
> >>>>
> >>>> The HDMI mode is automatically started at boot and the audio
> >>>> (when enabled) registers as a codec into ALSA.
> >>>>
> >>>> SPDIF DAI format was also added to ASoC as it is required
> >>>> by adv7511 audio.
> >>>>
> >>>> Signed-off-by: Jose Abreu <joabreu at synopsys.com>
> >>>> ---
> >>>>
> >>>> No changes v1 -> v2.
> >>>>
> >>>> drivers/gpu/drm/i2c/Kconfig | 11 +
> >>>> drivers/gpu/drm/i2c/Makefile | 2 +
> >>>> drivers/gpu/drm/i2c/adv7511.c | 1024
> >>>> ----------------------------
> >>>> drivers/gpu/drm/i2c/adv7511.h | 41 ++
> >>>> drivers/gpu/drm/i2c/adv7511_audio.c | 310 +++++++++++
> >>>> drivers/gpu/drm/i2c/adv7511_core.c | 1005
> >>>> ++++++++++++++++++++++++++++
> >>>
> >>> Please use git-format-patch -M to detect renames if you send a new
> >>> version
> >>> of this series, it will help with review.
> >>
> >> Ok, will do that in next version.
> >>
> >>>> include/sound/soc-dai.h | 1 +
> >>>> 7 files changed, 1370 insertions(+), 1024 deletions(-)
> >>>> delete mode 100644 drivers/gpu/drm/i2c/adv7511.c
> >>>> create mode 100644 drivers/gpu/drm/i2c/adv7511_audio.c
> >>>> create mode 100644 drivers/gpu/drm/i2c/adv7511_core.c
> >>>
> >>> [snip]
> >>>
> >>>> diff --git a/drivers/gpu/drm/i2c/adv7511_core.c
> >>>> b/drivers/gpu/drm/i2c/adv7511_core.c new file mode 100644
> >>>> index 0000000..d54256a
> >>>> --- /dev/null
> >>>> +++ b/drivers/gpu/drm/i2c/adv7511_core.c
> >>>
> >>> [snip]
> >>>
> >>>> +static int adv7511_probe(struct i2c_client *i2c, const struct
> >>>> i2c_device_id *id) +{
> >>>> + struct adv7511_link_config link_config;
> >>>> + struct adv7511 *adv7511;
> >>>> + struct device *dev = &i2c->dev;
> >>>> + unsigned int val;
> >>>> + int ret;
> >>>> +
> >>>> + if (!dev->of_node)
> >>>> + return -EINVAL;
> >>>> +
> >>>> + adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
> >>>> + if (!adv7511)
> >>>> + return -ENOMEM;
> >>>> +
> >>>> + adv7511->powered = false;
> >>>> + adv7511->status = connector_status_disconnected;
> >>>> +
> >>>> + ret = adv7511_parse_dt(dev->of_node, &link_config);
> >>>> + if (ret)
> >>>> + return ret;
> >>>> +
> >>>> + /*
> >>>> + * The power down GPIO is optional. If present, toggle it from active
> >>>> to
> >>>> + * inactive to wake up the encoder.
> >>>> + */
> >>>> + adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd",
> >
> > GPIOD_OUT_HIGH);
> >
> >>>> + if (IS_ERR(adv7511->gpio_pd))
> >>>> + return PTR_ERR(adv7511->gpio_pd);
> >>>> +
> >>>> + if (adv7511->gpio_pd) {
> >>>> + mdelay(5);
> >>>> + gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
> >>>> + }
> >>>> +
> >>>> + adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
> >>>> + if (IS_ERR(adv7511->regmap))
> >>>> + return PTR_ERR(adv7511->regmap);
> >>>> +
> >>>> + ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
> >>>> + if (ret)
> >>>> + return ret;
> >>>> + dev_dbg(dev, "Rev. %d\n", val);
> >>>> +
> >>>> + ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
> >>>> + ARRAY_SIZE(adv7511_fixed_registers));
> >>>> + if (ret)
> >>>> + return ret;
> >>>> +
> >>>> + regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR,
> >>>> edid_i2c_addr);
> >>>> + regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
> >>>> + packet_i2c_addr);
> >>>> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
> >
> > cec_i2c_addr);
> >
> >>>> + adv7511_packet_disable(adv7511, 0xffff);
> >>>> +
> >>>> + adv7511->i2c_main = i2c;
> >>>> + adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
> >>>> + if (!adv7511->i2c_edid)
> >>>> + return -ENOMEM;
> >>>> +
> >>>> + if (i2c->irq) {
> >>>> + init_waitqueue_head(&adv7511->wq);
> >>>> +
> >>>> + ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
> >>>> + adv7511_irq_handler,
> >>>> + IRQF_ONESHOT, dev_name(dev),
> >>>> + adv7511);
> >>>> + if (ret)
> >>>> + goto err_i2c_unregister_device;
> >>>> + }
> >>>> +
> >>>> + /* CEC is unused for now */
> >>>> + regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
> >>>> + ADV7511_CEC_CTRL_POWER_DOWN);
> >>>> +
> >>>> + adv7511_power_off(adv7511);
> >>>> +
> >>>> + i2c_set_clientdata(i2c, adv7511);
> >>>> +
> >>>> +#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
> >>>> + adv7511_audio_init(&i2c->dev);
> >>>> +#endif
> >>>
> >>> Shouldn't we condition this to the audio channel being somehow described
> >>> in DT ? If a board doesn't route audio signals to the ADV7511 audio
> >>> input, there's no need to register an audio codec.
> >>
> >> I can do this but the audio is already conditionally compiled using
> >> menuconfig. Is it really necessary to add this extra layer of condition?
> >
> > The idea is that enabling support for ADV7511 audio in the kernel isn't
> > coupled with whether the system includes audio support. It would be
> > confusing, and would also waste resources, to create a Linux sound device
> > when no sound channel is routed on the board.
>
> Ok, will do that in next version. Another question: I am facing a problem
> when compiling ALSA as a module, as the ADV7511 audio is not embedded into
> ALSA the compilation fails with undefined references to ALSA functions. The
> solution that I am planning to use is to add a default value to the ADV7511
> kconfig entry so that the driver is compiled as module when ALSA is a
> module and as embedded if ALSA is embedded. Is this okay or is there
> another solution without moving the ADV7511 audio to the ALSA directory?
You can write the Kconfig dependency as
depends on DRM_I2C_ADV7511
depends on SND_SOC=y || (SND_SOC && DRM_I2C_ADV7511=m)
> >>>> +
> >>>> + adv7511_set_link_config(adv7511, &link_config);
> >>>> +
> >>>> + /* Enable HDMI mode */
> >>>> + regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
> >>>> + ADV7511_HDMI_CFG_MODE_MASK,
> >>>> + ADV7511_HDMI_CFG_MODE_HDMI);
> >>>> +
> >>>> + return 0;
> >>>> +
> >>>> +err_i2c_unregister_device:
> >>>> + i2c_unregister_device(adv7511->i2c_edid);
> >>>> +
> >>>> + return ret;
> >>>> +}
--
Regards,
Laurent Pinchart
More information about the linux-snps-arc
mailing list