[PATCH 02/11] pwm: bcm2835: Simplify using devm functions

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Fri Sep 29 09:19:09 PDT 2023


With devm_clk_get_enabled() the call to clk_disable_unprepare() can be
dropped from the error path and the remove callback. With
devm_pwmchip_add() pwmchip_remove() can be dropped. Then the remove
callback is empty and can go away, too. With bcm2835_pwm_remove() the only
user of platform_get_drvdata() is gone and so platform_set_drvdata() can
be dropped from .probe(), too.

Also use dev_err_probe() for simplified (and improved) error reporting.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-bcm2835.c | 27 ++++-----------------------
 1 file changed, 4 insertions(+), 23 deletions(-)

diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c
index bdfc2a5ec0d6..7261e57159b1 100644
--- a/drivers/pwm/pwm-bcm2835.c
+++ b/drivers/pwm/pwm-bcm2835.c
@@ -147,39 +147,21 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->base))
 		return PTR_ERR(pc->base);
 
-	pc->clk = devm_clk_get(&pdev->dev, NULL);
+	pc->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(pc->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
 				     "clock not found\n");
 
-	ret = clk_prepare_enable(pc->clk);
-	if (ret)
-		return ret;
-
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &bcm2835_pwm_ops;
 	pc->chip.npwm = 2;
 
-	platform_set_drvdata(pdev, pc);
-
-	ret = pwmchip_add(&pc->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
 	if (ret < 0)
-		goto add_fail;
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to add pwmchip\n");
 
 	return 0;
-
-add_fail:
-	clk_disable_unprepare(pc->clk);
-	return ret;
-}
-
-static void bcm2835_pwm_remove(struct platform_device *pdev)
-{
-	struct bcm2835_pwm *pc = platform_get_drvdata(pdev);
-
-	pwmchip_remove(&pc->chip);
-
-	clk_disable_unprepare(pc->clk);
 }
 
 static const struct of_device_id bcm2835_pwm_of_match[] = {
@@ -194,7 +176,6 @@ static struct platform_driver bcm2835_pwm_driver = {
 		.of_match_table = bcm2835_pwm_of_match,
 	},
 	.probe = bcm2835_pwm_probe,
-	.remove_new = bcm2835_pwm_remove,
 };
 module_platform_driver(bcm2835_pwm_driver);
 
-- 
2.40.1




More information about the linux-rpi-kernel mailing list