[PATCH 2/3] drm/vc4: Add color transformation matrix (CTM) support

Ville Syrjälä ville.syrjala at linux.intel.com
Mon Mar 19 07:09:24 PDT 2018


On Fri, Mar 16, 2018 at 10:50:58PM +0100, Stefan Schake wrote:
> The hardware supports a CTM with S0.9 values. We therefore only allow
> a value of 1.0 or fractional only and reject all others with integer
> parts. This restriction is mostly inconsequential in practice since
> commonly used transformation matrices have all scalars <= 1.0.
> 
> Signed-off-by: Stefan Schake <stschake at gmail.com>
> ---
>  drivers/gpu/drm/vc4/vc4_crtc.c | 99 ++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 96 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_crtc.c b/drivers/gpu/drm/vc4/vc4_crtc.c
> index 8d71098..5c83fd2 100644
> --- a/drivers/gpu/drm/vc4/vc4_crtc.c
> +++ b/drivers/gpu/drm/vc4/vc4_crtc.c
> @@ -315,6 +315,81 @@ vc4_crtc_update_gamma_lut(struct drm_crtc *crtc)
>  	vc4_crtc_lut_load(crtc);
>  }
>  
> +/* Converts a DRM S31.32 value to the HW S0.9 format. */
> +static u16 vc4_crtc_s31_32_to_s0_9(u64 in)
> +{
> +	u16 r;
> +
> +	/* Sign bit. */
> +	r = in & BIT_ULL(63) ? BIT(9) : 0;
> +	/* We have zero integer bits so we can only saturate here. */
> +	if ((in & GENMASK_ULL(62, 32)) > 0)
> +		r |= GENMASK(8, 0);
> +	/* Otherwise take the 9 most important fractional bits. */
> +	else
> +		r |= (in >> 22) & GENMASK(8, 0);
> +	return r;
> +}
> +
> +static void
> +vc4_crtc_update_ctm(struct drm_crtc *crtc)
> +{
> +	struct drm_device *dev = crtc->dev;
> +	struct vc4_dev *vc4 = to_vc4_dev(dev);
> +	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
> +	struct drm_color_ctm *ctm = crtc->state->ctm->data;
> +
> +	HVS_WRITE(SCALER_OLEDCOEF2,
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[0]),
> +				SCALER_OLEDCOEF2_R_TO_R) |
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[3]),
> +				SCALER_OLEDCOEF2_R_TO_G) |
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[6]),
> +				SCALER_OLEDCOEF2_R_TO_B));
> +	HVS_WRITE(SCALER_OLEDCOEF1,
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[1]),
> +				SCALER_OLEDCOEF1_G_TO_R) |
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[4]),
> +				SCALER_OLEDCOEF1_G_TO_G) |
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[7]),
> +				SCALER_OLEDCOEF1_G_TO_B));
> +	HVS_WRITE(SCALER_OLEDCOEF0,
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[2]),
> +				SCALER_OLEDCOEF0_B_TO_R) |
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[5]),
> +				SCALER_OLEDCOEF0_B_TO_G) |
> +		  VC4_SET_FIELD(vc4_crtc_s31_32_to_s0_9(ctm->matrix[8]),
> +				SCALER_OLEDCOEF0_B_TO_B));
> +
> +	/* Channel is 0-based but for DISPFIFO, 0 means disabled. */
> +	HVS_WRITE(SCALER_OLEDOFFS, VC4_SET_FIELD(vc4_crtc->channel + 1,
> +						 SCALER_OLEDOFFS_DISPFIFO));
> +}
> +
> +/* Check if the CTM contains valid input.
> + *
> + * DRM exposes CTM with S31.32 scalars, but the HW only supports S0.9.
> + * We don't allow integer values >1, and 1 only without fractional part
> + * to handle the common 1.0 value.
> + */
> +static int vc4_crtc_atomic_check_ctm(struct drm_crtc_state *state)
> +{
> +	struct drm_color_ctm *ctm = state->ctm->data;
> +	u32 i;
> +
> +	for (i = 0; i < ARRAY_SIZE(ctm->matrix); i++) {
> +		u64 val = ctm->matrix[i];
> +
> +		val &= ~BIT_ULL(63);
> +		if ((val >> 32) > 1)
> +			return -EINVAL;
> +		if ((val >> 32) == 1 && (val & GENMASK_ULL(31, 0)) != 0)
> +			return -EINVAL;

'val > BIT_ULL(32)' ?

> +	}
> +
> +	return 0;
> +}
> +
>  static u32 vc4_get_fifo_full_level(u32 format)
>  {
>  	static const u32 fifo_len_bytes = 64;
> @@ -621,6 +696,15 @@ static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
>  	if (hweight32(state->connector_mask) > 1)
>  		return -EINVAL;
>  
> +	if (state->ctm) {
> +		/* The CTM hardware has no integer bits, so we check
> +		 * and reject scalars >1.0 that we have no chance of
> +		 * approximating.
> +		 */
> +		if (vc4_crtc_atomic_check_ctm(state))
> +			return -EINVAL;
> +	}
> +
>  	drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, state)
>  		dlist_count += vc4_plane_dlist_size(plane_state);
>  
> @@ -697,8 +781,17 @@ static void vc4_crtc_atomic_flush(struct drm_crtc *crtc,
>  	if (crtc->state->active && old_state->active)
>  		vc4_crtc_update_dlist(crtc);
>  
> -	if (crtc->state->color_mgmt_changed && crtc->state->gamma_lut)
> -		vc4_crtc_update_gamma_lut(crtc);
> +	if (crtc->state->color_mgmt_changed) {
> +		if (crtc->state->gamma_lut)
> +			vc4_crtc_update_gamma_lut(crtc);
> +
> +		if (crtc->state->ctm)
> +			vc4_crtc_update_ctm(crtc);
> +		/* We are transitioning to CTM disabled. */
> +		else if (old_state->ctm)
> +			HVS_WRITE(SCALER_OLEDOFFS,
> +				  VC4_SET_FIELD(0, SCALER_OLEDOFFS_DISPFIFO));
> +	}
>  
>  	if (debug_dump_regs) {
>  		DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
> @@ -1036,7 +1129,7 @@ static int vc4_crtc_bind(struct device *dev, struct device *master, void *data)
>  	primary_plane->crtc = crtc;
>  	vc4_crtc->channel = vc4_crtc->data->hvs_channel;
>  	drm_mode_crtc_set_gamma_size(crtc, ARRAY_SIZE(vc4_crtc->lut_r));
> -	drm_crtc_enable_color_mgmt(crtc, 0, false, crtc->gamma_size);
> +	drm_crtc_enable_color_mgmt(crtc, 0, true, crtc->gamma_size);
>  
>  	/* Set up some arbitrary number of planes.  We're not limited
>  	 * by a set number of physical registers, just the space in
> -- 
> 2.7.4
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC



More information about the linux-rpi-kernel mailing list