[PATCH 2/2] drm/vc4: Ensure interrupts are disabled
stschake at gmail.com
Tue Nov 14 03:43:31 PST 2017
On Tue, Nov 14, 2017 at 1:18 AM, Eric Anholt <eric at anholt.net> wrote:
> Stefan Schake <stschake at gmail.com> writes:
>> The overflow mem work callback vc4_overflow_mem_work reenables its
>> associated interrupt upon completion. To ensure all interrupts are disabled
>> when we return from vc4_irq_uninstall, we need to disable it again if
>> cancel_work_sync indicated pending work.
> Is there a reason we need the interrupts disabled at the V3D level while
> we have the IRQ disabled at the irqchip level? Once we re-enable at the
> irqchip, we immediately V3D_WRITE(V3D_INTENA, V3D_DRIVER_IRQS) anyway.
irqchip will mask it in the ARM interrupt controller, so we will certainly never
see an interrupt. I'm not sure on the exact guarantees V3D_INTENA and
V3D_INTCTL make - does the state in INTENA affect if V3D will signal an
interrupt in INTCTL? We're not currently clearing the latter in postinstall.
>From a practical perspective, we're not doing anything in between uninstall
and postinstall that would trigger the interrupt. So in that sense
More information about the linux-rpi-kernel