[PATCH 02/14] mmc: bcm2835: replace spaces with tabs

[Stefan Wahren]

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 drivers/mmc/host/bcm2835.c |  124 ++++++++++++++++++++++----------------------
 1 file changed, 62 insertions(+), 62 deletions(-)

diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c
index fbf3c14..fe0915e 100644
--- a/drivers/mmc/host/bcm2835.c
+++ b/drivers/mmc/host/bcm2835.c
@@ -59,77 +59,77 @@
 #define SDDATA 0x40 /* Data to/from SD card            - 32 R/W */
 #define SDHBLC 0x50 /* Host block count (SDIO/SDHC)    -  9 R/W */
 
-#define SDCMD_NEW_FLAG                  0x8000
-#define SDCMD_FAIL_FLAG                 0x4000
-#define SDCMD_BUSYWAIT                  0x800
-#define SDCMD_NO_RESPONSE               0x400
-#define SDCMD_LONG_RESPONSE             0x200
-#define SDCMD_WRITE_CMD                 0x80
-#define SDCMD_READ_CMD                  0x40
-#define SDCMD_CMD_MASK                  0x3f
-
-#define SDCDIV_MAX_CDIV                 0x7ff
-
-#define SDHSTS_BUSY_IRPT                0x400
-#define SDHSTS_BLOCK_IRPT               0x200
-#define SDHSTS_SDIO_IRPT                0x100
-#define SDHSTS_REW_TIME_OUT             0x80
-#define SDHSTS_CMD_TIME_OUT             0x40
-#define SDHSTS_CRC16_ERROR              0x20
-#define SDHSTS_CRC7_ERROR               0x10
-#define SDHSTS_FIFO_ERROR               0x08
+#define SDCMD_NEW_FLAG			0x8000
+#define SDCMD_FAIL_FLAG			0x4000
+#define SDCMD_BUSYWAIT			0x800
+#define SDCMD_NO_RESPONSE		0x400
+#define SDCMD_LONG_RESPONSE		0x200
+#define SDCMD_WRITE_CMD			0x80
+#define SDCMD_READ_CMD			0x40
+#define SDCMD_CMD_MASK			0x3f
+
+#define SDCDIV_MAX_CDIV			0x7ff
+
+#define SDHSTS_BUSY_IRPT		0x400
+#define SDHSTS_BLOCK_IRPT		0x200
+#define SDHSTS_SDIO_IRPT		0x100
+#define SDHSTS_REW_TIME_OUT		0x80
+#define SDHSTS_CMD_TIME_OUT		0x40
+#define SDHSTS_CRC16_ERROR		0x20
+#define SDHSTS_CRC7_ERROR		0x10
+#define SDHSTS_FIFO_ERROR		0x08
 /* Reserved */
 /* Reserved */
-#define SDHSTS_DATA_FLAG                0x01
+#define SDHSTS_DATA_FLAG		0x01
 
-#define SDHSTS_TRANSFER_ERROR_MASK      (SDHSTS_CRC7_ERROR | \
+#define SDHSTS_TRANSFER_ERROR_MASK	(SDHSTS_CRC7_ERROR | \
 					 SDHSTS_CRC16_ERROR | \
 					 SDHSTS_REW_TIME_OUT | \
 					 SDHSTS_FIFO_ERROR)
 
-#define SDHSTS_ERROR_MASK               (SDHSTS_CMD_TIME_OUT | \
+#define SDHSTS_ERROR_MASK		(SDHSTS_CMD_TIME_OUT | \
 					 SDHSTS_TRANSFER_ERROR_MASK)
 
-#define SDHCFG_BUSY_IRPT_EN     BIT(10)
-#define SDHCFG_BLOCK_IRPT_EN    BIT(8)
-#define SDHCFG_SDIO_IRPT_EN     BIT(5)
-#define SDHCFG_DATA_IRPT_EN     BIT(4)
-#define SDHCFG_SLOW_CARD        BIT(3)
-#define SDHCFG_WIDE_EXT_BUS     BIT(2)
-#define SDHCFG_WIDE_INT_BUS     BIT(1)
-#define SDHCFG_REL_CMD_LINE     BIT(0)
-
-#define SDEDM_FORCE_DATA_MODE   BIT(19)
-#define SDEDM_CLOCK_PULSE       BIT(20)
-#define SDEDM_BYPASS            BIT(21)
-
-#define SDEDM_WRITE_THRESHOLD_SHIFT 9
-#define SDEDM_READ_THRESHOLD_SHIFT 14
-#define SDEDM_THRESHOLD_MASK     0x1f
-
-#define SDEDM_FSM_MASK           0xf
-#define SDEDM_FSM_IDENTMODE      0x0
-#define SDEDM_FSM_DATAMODE       0x1
-#define SDEDM_FSM_READDATA       0x2
-#define SDEDM_FSM_WRITEDATA      0x3
-#define SDEDM_FSM_READWAIT       0x4
-#define SDEDM_FSM_READCRC        0x5
-#define SDEDM_FSM_WRITECRC       0x6
-#define SDEDM_FSM_WRITEWAIT1     0x7
-#define SDEDM_FSM_POWERDOWN      0x8
-#define SDEDM_FSM_POWERUP        0x9
-#define SDEDM_FSM_WRITESTART1    0xa
-#define SDEDM_FSM_WRITESTART2    0xb
-#define SDEDM_FSM_GENPULSES      0xc
-#define SDEDM_FSM_WRITEWAIT2     0xd
-#define SDEDM_FSM_STARTPOWDOWN   0xf
-
-#define SDDATA_FIFO_WORDS        16
-
-#define FIFO_READ_THRESHOLD     4
-#define FIFO_WRITE_THRESHOLD    4
-#define SDDATA_FIFO_PIO_BURST   8
-#define CMD_DALLY_US            1
+#define SDHCFG_BUSY_IRPT_EN	BIT(10)
+#define SDHCFG_BLOCK_IRPT_EN	BIT(8)
+#define SDHCFG_SDIO_IRPT_EN	BIT(5)
+#define SDHCFG_DATA_IRPT_EN	BIT(4)
+#define SDHCFG_SLOW_CARD	BIT(3)
+#define SDHCFG_WIDE_EXT_BUS	BIT(2)
+#define SDHCFG_WIDE_INT_BUS	BIT(1)
+#define SDHCFG_REL_CMD_LINE	BIT(0)
+
+#define SDEDM_FORCE_DATA_MODE	BIT(19)
+#define SDEDM_CLOCK_PULSE	BIT(20)
+#define SDEDM_BYPASS		BIT(21)
+
+#define SDEDM_WRITE_THRESHOLD_SHIFT	9
+#define SDEDM_READ_THRESHOLD_SHIFT	14
+#define SDEDM_THRESHOLD_MASK		0x1f
+
+#define SDEDM_FSM_MASK		0xf
+#define SDEDM_FSM_IDENTMODE	0x0
+#define SDEDM_FSM_DATAMODE	0x1
+#define SDEDM_FSM_READDATA	0x2
+#define SDEDM_FSM_WRITEDATA	0x3
+#define SDEDM_FSM_READWAIT	0x4
+#define SDEDM_FSM_READCRC	0x5
+#define SDEDM_FSM_WRITECRC	0x6
+#define SDEDM_FSM_WRITEWAIT1	0x7
+#define SDEDM_FSM_POWERDOWN	0x8
+#define SDEDM_FSM_POWERUP	0x9
+#define SDEDM_FSM_WRITESTART1	0xa
+#define SDEDM_FSM_WRITESTART2	0xb
+#define SDEDM_FSM_GENPULSES	0xc
+#define SDEDM_FSM_WRITEWAIT2	0xd
+#define SDEDM_FSM_STARTPOWDOWN	0xf
+
+#define SDDATA_FIFO_WORDS	16
+
+#define FIFO_READ_THRESHOLD	4
+#define FIFO_WRITE_THRESHOLD	4
+#define SDDATA_FIFO_PIO_BURST	8
+#define CMD_DALLY_US		1
 
 struct bcm2835_host {
 	spinlock_t		lock;
-- 
1.7.9.5