[PATCH 2/2] ARM: dts: Add the PWM node to Cygnus

Scott Branden scott.branden at broadcom.com
Thu Aug 31 13:10:18 PDT 2017


pwm node is correct.


On 17-08-31 11:54 AM, Eric Anholt wrote:
> This is connected up to the backlight on 911360_entphn, which we'll
> need for a panel driver.  For now, leave the node disabled in the
> shared dtsi.
>
> Signed-off-by: Eric Anholt <eric at anholt.net>
Acked-by: Scott Branden <scott.branden at broadcom.com>
> ---
>   arch/arm/boot/dts/bcm-cygnus.dtsi | 8 ++++++++
>   1 file changed, 8 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 74f73ff24aec..b9a654d733ae 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -585,6 +585,14 @@
>   			status = "disabled";
>   		};
>   
> +		pwm: pwm at 180aa500 {
> +			compatible = "brcm,kona-pwm";
> +			reg = <0x180aa500 0xc4>;
> +			#pwm-cells = <3>;
> +			clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
> +			status = "disabled";
> +		};
> +
>   		keypad: keypad at 180ac000 {
>   			compatible = "brcm,bcm-keypad";
>   			reg = <0x180ac000 0x14c>;




More information about the linux-rpi-kernel mailing list