[PATCH v2 3/8] i2c: bcm2835: Use ratelimited logging on transfer errors

Martin Sperl kernel at martin.sperl.org
Tue Sep 27 06:01:54 PDT 2016


> On 27 Sep 2016, at 13:57, Noralf Trønnes <noralf at tronnes.org> wrote:
> 
> Writing to an AT24C32 generates on average 2x i2c transfer errors per
> 32-byte page write. Which amounts to a lot for a 4k write. This is due
> to the fact that the chip doesn't respond during it's internal write
> cycle when the at24 driver tries and retries the next write.
> Reduce this flooding of the log by using dev_err_ratelimited().
> 
> Signed-off-by: Noralf Trønnes <noralf at tronnes.org>
> Reviewed-by: Eric Anholt <eric at anholt.net>
> ---
> drivers/i2c/busses/i2c-bcm2835.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
> index df036ed..370a322 100644
> --- a/drivers/i2c/busses/i2c-bcm2835.c
> +++ b/drivers/i2c/busses/i2c-bcm2835.c
> @@ -207,7 +207,8 @@ static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev,
>        (msg->flags & I2C_M_IGNORE_NAK))
>        return 0;
> 
> -    dev_err(i2c_dev->dev, "i2c transfer failed: %x\n", i2c_dev->msg_err);
> +    dev_err_ratelimited(i2c_dev->dev, "i2c transfer failed: %x\n",
> +                i2c_dev->msg_err);
Do we really need this error message at all?

Maybe just remove it instead, because error messages during 
"normal"/successfull operations of at24 seems  strange.

Or make it a debug message instead.

Martin



More information about the linux-rpi-kernel mailing list