[PATCH 1/8] ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.

Stefan Wahren stefan.wahren at i2se.com
Thu Sep 8 10:55:29 PDT 2016


Hi Gerd,

> Gerd Hoffmann <kraxel at redhat.com> hat am 7. September 2016 um 12:31
> geschrieben:
> 
> 
> From: Eric Anholt <eric at anholt.net>
> 
> The BCM2835-ARM-Peripherals.pdf documentation specifies what the
> function selects do for the pins, and there are a bunch of obvious
> groupings to be made.  With these created, we'll be able to replace
> bcm2835-rpi.dtsi's main "set all of these pins to alt0" with
> references to specific groups we want enabled.
> 
> Signed-off-by: Eric Anholt <eric at anholt.net>
> ---
>  arch/arm/boot/dts/bcm283x.dtsi | 170
> +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 170 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
> index 4d9f3ab..acb616f 100644
> --- a/arch/arm/boot/dts/bcm283x.dtsi
> +++ b/arch/arm/boot/dts/bcm283x.dtsi
> @@ -131,6 +131,176 @@
>  
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
> +
> +			/* Defines pin muxing groups according to
> +			 * BCM2835-ARM-Peripherals.pdf page 102.
> +			 *
> +			 * While each pin can have its mux selected
> +			 * for various functions individually, some
> +			 * groups only make sense to switch to a
> +			 * particular function together.
> +			 */
> ...
> +			i2c0_gpio32: i2c0_gpio32 {
> +				brcm,pins = <32 34>;
> +				brcm,function = <BCM2835_FSEL_ALT0>;
> +			};
> +			spio0_gpio35: spio0_gpio35 {
> +				brcm,pins = <35 36 37 38 39>;
> +				brcm,function = <BCM2835_FSEL_ALT0>;
> +			};

s/spio0/spi0

> +			pwm0_gpio40: pwm0_gpio40 {
> +				brcm,pins = <40>;
> +				brcm,function = <BCM2835_FSEL_ALT0>;
> +			};
> ...
> +			uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
> +				brcm,pins = <42 43>;
> +				brcm,function = <BCM2835_FSEL_ALT5>;
> +			};

Please sort all pinctrl nodes by label.

According to this page [1] the pinctrl group for parallel display interface is
missing. Is it intended?

[1] - http://elinux.org/RPi_BCM2835_GPIOs

>  		};
>  
>  		uart0: serial at 7e201000 {
> -- 
> 1.8.3.1
> 
> 
> _______________________________________________
> linux-rpi-kernel mailing list
> linux-rpi-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rpi-kernel



More information about the linux-rpi-kernel mailing list