[PATCH V2 RFC 3/6] ARM: dts: bcm283x: Add missing usb clock

Stefan Wahren stefan.wahren at i2se.com
Tue Jul 26 11:53:30 PDT 2016


According to the DWC2 binding an appropriate clock is required.
This clock isn't handled by bcm2835 clock driver, so add a fixed
clock to the bcm283x DT.

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 arch/arm/boot/dts/bcm283x.dtsi |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index b982522..5472800 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -289,6 +289,8 @@
 			interrupts = <1 9>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
 		};
 
 		v3d: v3d at 7ec00000 {
@@ -316,5 +318,12 @@
 			clock-frequency = <19200000>;
 		};
 
+		clk_usb: clock at 4 {
+			compatible = "fixed-clock";
+			reg = <4>;
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
 	};
 };
-- 
1.7.9.5




More information about the linux-rpi-kernel mailing list