[PATCH] ARM: bcm2835: dt: Add Raspberry Pi Zero

[Stefan Wahren]

Hi Eric,

> Eric Anholt <eric at anholt.net> hat am 20. Juli 2016 um 21:36 geschrieben:
> 
> 
> Stefan Wahren <stefan.wahren at i2se.com> writes:
> 
> > Hi Lubomir,
> >
> >> Lubomir Rintel <lkundrak at v3.sk> hat am 4. Februar 2016 um 08:39
> >> geschrieben:
> >> 
> >> 
> >> Notable difference from the other Raspberry Pi boards is the lack of PWR
> >> LED.
> >> 
> >> Signed-off-by: Lubomir Rintel <lkundrak at v3.sk>
> >
> > do you have any plans to submit a V2 of this patch or should i take over?
> 
> It's been a while, so I'd love if you picked it up and resubmitted with
> the LED changes.

i also want to take care of those dwc2 warnings, which might need some
additional DT settings:

dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW
configuration.
dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW
configuration.
dwc2 20980000.usb: Specified GNPTXFDEP=1024 > 32

What LED change do you expect?

Lubomir's suggestion is HIGH_ACTIVE which is more userfriendly because of the
missing PWR LED.
Changing to LOW_ACTIVE would be more stringent according to all the other RPis.

Btw the DTS for the RPi Zero has been dropped in downstream.

Regards
Stefan