[PATCH 0/3] mmc: sdhci-iproc: add bcm2835 support

[Scott Branden]

Looks clean Stefan.  I'll try and revisit the caps setting in the future 
and may be able to provide additional settings in a later patch.

This patch series:
Acked-by: Scott Branden <sbranden at broadcom.com>


On 16-01-27 02:25 PM, Stefan Wahren wrote:
> This patch series based on the suggestion of Scott Branden to implement
> bcm2835 support into sdhci-iproc [1].
>
> These changes provide the following advantages:
>    * no need to maintain a separate driver for bcm2835
>    * improve support and test coverage of bcm2835 mmc support
>    * get the rid of SDHCI_CAPABILITIES hack in bcm2835_sdhci_readl
>    * increase write performance by avoiding delays in write ops
>
> Patch 1 prepare sdhci-iproc for another platform. Patch 2 and 3
> are the actually changes for bcm2835 support.
>
> These series has been tested on Raspberry Pi B with dd (direct I/O):
>
> sdhci-bcm2835
>
> 378 kB/s WRITE
> 10,6 MB/s READ
>
> sdhci-iproc (after applying patch series)
>
> 881 kB/s WRITE
> 10,8 MB/s READ
>
> Changes since RFC:
>    * drop patch which tries to add quirks for bcm2835 in DT and define all
>      quirks in driver instead to keep old DTs working with sdhci-iproc
>      (suggestion by Stephen Warren)
>    * define MMC caps in shdci-iproc platform data to make adding new
>      platforms more easily (suggestion by Stephen Warren)
>
> [1] - https://lkml.org/lkml/2015/12/22/525
>
> Stefan Wahren (3):
>    mmc: sdhci-iproc: define MMC caps in platform data
>    mmc: sdhci-iproc: add bcm2835 support
>    DT: sdhci-iproc: add bcm2835 compatible
>
>   .../devicetree/bindings/mmc/brcm,sdhci-iproc.txt   |    5 ++++-
>   drivers/mmc/host/Kconfig                           |    6 +++---
>   drivers/mmc/host/sdhci-iproc.c                     |   20 ++++++++++++++++++--
>   3 files changed, 25 insertions(+), 6 deletions(-)
>