[PATCH V2 RFC 0/6] ARM: dts: bcm2835: Add Raspberry Pi Zero
eric at anholt.net
Thu Aug 18 17:37:56 PDT 2016
Stefan Wahren <stefan.wahren at i2se.com> writes:
> Hi Eric,
>> Eric Anholt <eric at anholt.net> hat am 18. August 2016 um 20:14 geschrieben:
>> Stefan Wahren <stefan.wahren at i2se.com> writes:
>> > This patch series is only a draft and not intended to be merged. Patches 1
>> > and 2
>> > aren't bcm2835 specific and should be helpful for other platforms.
>> > The patches 2 - 4 are required for otg / gadget mode. The last patch
>> > based on the work of Lubomir Rintel  and Noralf Trønnes .
>> > Changes since V1:
>> > - rebase to current linux-next
>> > - add patches 1 - 4 for otg/gadget support
>> > - add patch 5 with model compatible
>> > - use polarity define for ACT LED
>> >  -
>> > http://lists.infradead.org/pipermail/linux-rpi-kernel/2016-February/003221.html
>> >  - https://github.com/raspberrypi/linux/pull/1239/
>> > Stefan Wahren (6):
>> > usb: dwc2: core: Avoid nonsense error in gadget mode
>> > usb: dwc2: Add DT properties to specify fifo size in host/otg mode
>> > ARM: dts: bcm283x: Add missing usb clock
>> > ARM: dts: bcm283x: Add generic USB PHY
>> > DT: bindings: bcm: Add Raspberry Pi Zero
>> > ARM: dts: bcm2835: Add Raspberry Pi Zero
>> Where are we at on these?
> I would like to split the series:
> part 1: Raspberry Pi Zero support (only USB host mode support)
> part 2: OTG / Peripheral support for BCM2835 (hope that i reach the point)
That sounds great.
>> I've been holding off waiting for the USB
>> bits to get settled. I can grab the bindings patch, but is there
>> anything else we could merge while you're working on USB?
> Maybe i missed something, but i didn't received any ACK from you about this
> In case everything is okay, you could also merge patch 3 since it's relevant to
> bcm283x and not RPi Zero specific.
Didn't miss anything. I hadn't acked yet since it looked like there
were open questions for the USB folks.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 800 bytes
Desc: not available
More information about the linux-rpi-kernel