[PATCH 2/2] ASoC: bcm2835: Add S16_LE support via packed DMA transfers
kernel at martin.sperl.org
Wed Apr 27 07:33:14 PDT 2016
> On 27.04.2016, at 15:26, Matthias Reichl <hias at horus.com> wrote:
> The bcm2835-i2s driver already has support for the S16_LE format but
> that format hasn't been made available because dmaengine_pcm didn't
> support packed data transfers.
> bcm2835-i2s needs 16-bit left+right channel data to be packed into
> a 32-bit word, the FIFO register is 32-bit only and doesn't support
> 16-bit access.
> Now that dmaengine_pcm supports packed transfers the format can
> be made available by setting the SND_DMAENGINE_PCM_DAI_FLAG_PACK flag.
> No further configuration is necessary:
> - snd_dmaengine_dai_dma_data.addr_width is already set to
> DMA_SLAVE_BUSWIDTH_4_BYTES to force 32-bit DMA transfers
> - dmaengine_pcm will pick up the S16_LE format from the DAI
> configuration and make it available since it's no longer
> masked out due to the PACK flag.
> - there are no further corner cases to catch in hw_params,
> since the channel count is fixed at 2 we always have two
> 16-bit stereo samples that can be transferred via 32-bit DMA
> Signed-off-by: Matthias Reichl <hias at horus.com>
Tested-by: Martin Sperl <kernel at martin.sperl.org>
More information about the linux-rpi-kernel