[PATCH 3/3] ARM: bcm2835: Add the auxiliary clocks to the device tree.

Stephen Warren swarren at wwwdotorg.org
Mon Sep 21 19:19:47 PDT 2015

On 09/10/2015 03:22 PM, Eric Anholt wrote:
> These will be used for enabling UART1, SPI1, and SPI2.

> diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi

> +		aux_clocks: aux-clocks at 0x7e215004 {
> +			compatible = "brcm,bcm2835-aux-clock";
> +			#clock-cells = <1>;
> +			reg = <0x7e215004 0x4>;

Actually, I take back the ack on this patch. This HW module has two
registers. The reg property should include both of those registers so
that if SW needs to start using the other register at some time in the
future, the entire set of registers is already represented in DT.

More information about the linux-rpi-kernel mailing list