[PATCH 01/10] dt/bindings: Add binding for BCM2835 mailbox driver

[Eric Anholt]

From: Lubomir Rintel <lkundrak at v3.sk>

v2: Split into a separate patch for submitting to the devicetree list.
    Consistently start node docs with a capital letter. device's
    address in the example shouldn't have "0x". Drop machine-specific
    interrupt numbers from the docs.  (changes by anholt).

Signed-off-by: Lubomir Rintel <lkundrak at v3.sk>
Signed-off-by: Craig McGeachie <slapdau at yahoo.com.au>
Signed-off-by: Eric Anholt <eric at anholt.net>
---
 .../devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt

diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
new file mode 100644
index 0000000..f5741a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
@@ -0,0 +1,19 @@
+Broadcom BCM2835 VideoCore mailbox IPC
+
+Required properties:
+
+- compatible : Should be "brcm,bcm2835-mbox"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt number. See
+  bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+- #mbox-cells : Specifies the number of cells needed to encode a
+  mailbox channel. The value shall be 1.
+
+Example:
+
+mailbox: mailbox at 7e00b800 {
+	compatible = "brcm,bcm2835-mbox";
+	reg = <0x7e00b880 0x40>;
+	interrupts = <0 1>;
+	#mbox-cells = <1>;
+};
-- 
2.1.4