[PATCH V2 RESEND 0/4] ARM: bcm2835: DT improvements

[Stephen Warren]

On 02/03/2015 07:47 PM, Rob Herring wrote:
> On Thu, Jan 29, 2015 at 12:10 PM, Stefan Wahren <stefan.wahren at i2se.com> wrote:
>> This patch series contains DT improvements for the Raspberry Pi.
>>
>> Patch 1,2: Add missing vendor prefix and root compatible properties
>> Patch 3,4: Use constants for pin function instead of error-prone numbers
>>
>> Changes in V2:
>> - add all currently known Raspberry Pi boards to binding documentation
>>    as suggested by Stephen Warren
>>
>> Stefan Wahren (4):
>>    dt-bindings: Add vendor prefix for Raspberry Pi
>>    dt-bindings: Add root properties for Raspberry Pi
>>    ARM: bcm2835: Add header file for pinctrl constants
>>    ARM: bcm2835: Use pinctrl header
>>
>>   Documentation/devicetree/bindings/arm/bcm2835.txt  |   31 ++++++++++++++++++--
>>   .../devicetree/bindings/vendor-prefixes.txt        |    1 +
>>   arch/arm/boot/dts/bcm2835-rpi-b-plus.dts           |    4 +--
>>   arch/arm/boot/dts/bcm2835-rpi-b.dts                |    4 +--
>>   arch/arm/boot/dts/bcm2835-rpi.dtsi                 |    8 ++---
>>   arch/arm/boot/dts/bcm2835.dtsi                     |    3 +-
>>   include/dt-bindings/pinctrl/bcm2835.h              |   27 +++++++++++++++++
>>   7 files changed, 67 insertions(+), 11 deletions(-)
>>   create mode 100644 include/dt-bindings/pinctrl/bcm2835.h
>
> Who do you intend to apply this? For the DT binding parts:
>
> Acked-by: Rob Herring <robh at kernel.org>

I assume Lee Jones will take this through the Tegra tree, to avoid any 
potential conflicts with other changes to these files in that tree.

I do still want to double-check with the Pi Foundation's downstream tree 
what compatible values they use. If they already have board-specific 
values, and they're sane, it'd be nice to align with those. 
Unfortunately, I haven't got around to that yet:-(