[PATCH 00/26] ARM: provide common arch init for DT clocks
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Wed Sep 18 10:55:14 PDT 2013
This is a patch set based on an RFC [1][2] sent earlier to provide a common
arch/arm init for DT clock providers. Currently, the call to of_clk_init(NULL)
to initialize DT clock providers is spread among several mach-dirs. Since most
machs require DT clocks initialized before timers, no initcall can be used.
By adding of_clk_init(NULL) to arch/arm time_init(), we can remove all
mach-specific .init_time hooks that basically called of_clk_init and
clocksource_of_init.
In contrast to the RFC version, of_clk_init(NULL) is now only called if no
custom .init_time callback is set. This allows some machs to still call clock
init themselves, as not all can be converted now. Therefore, this patch sets
drops conversion of mach-mvebu and mach-zynq. New machs that were introduced
with v3.12-rc1 are also converted, except mach-u300 that requires clocks
before irqs.
The patch set is based on v3.12-rc1 and further depends on a topic branch
created by Stephen Warren for mach-tegra [3]. It is now split into preparation
and removal patches to not break bisectability. I added all Acked-by/Tested-by's
where applicable or dropped them, if the patch was separated into two.
It has been compile tested for all machs involved with the following defconfigs
(multi_v7, bcm2835, dove, exynos, kirkwood, mxs, nhk8815) and nspire selected
on multi_v4_v5.
Patches 1-8 comprise preparation patches that convert machs nomadik, prima2,
socfpga, sunxi, tegra, and vt8500 to usual .init_time callbacks calling only
of_clk_init and clocksource_of_init.
Patch 9 then introduces of_clk_init(NULL) to the arch-wide default .init_time
callback.
Patches 10-26 finally remove custom .init_time callbacks from the machs involved.
The patches have been pushed to a topic branch based on v3.12-rc1 with tegra's
tegra-for-3.13-deps-for-arm-init-time-cleanup branch merged in to
https://github.com/shesselba/linux-dove.git clk-of-init-v1_for-3.13
[1] http://www.spinics.net/lists/arm-kernel/msg268260.html
[2] http://www.spinics.net/lists/arm-kernel/msg270173.html
[3] http://www.spinics.net/lists/arm-kernel/msg273957.html
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git tegra-for-3.13-deps-for-arm-init-time-cleanup
Sebastian Hesselbarth (26):
ARM: nomadik: move mtu setup to clocksource init
clk: nomadik: move src init out of nomadik_clk_init
clk: nomadik: declare OF clock provider
clk: prima2: declare OF clock provider
ARM: socfgpa: prepare for arch-wide .init_time callback
clk: sunxi: declare OF clock provider
clk: vt8500: parse pmc_base from clock driver
ARM: vt8500: prepare for arch-wide .init_time callback
ARM: call of_clk_init from default time_init handler
ARM: bcm2835: remove custom .init_time hook
ARM: dove: remove custom .init_time hook
ARM: exynos: remove custom .init_time hook
ARM: highbank: remove custom .init_time hook
ARM: imx: remove custom .init_time hook
ARM: kirkwood: remove custom .init_time hook
ARM: mxs: remove custom .init_time hook
ARM: nomadik: remove custom .init_time hook
ARM: nspire: remove custom .init_time hook
ARM: prima2: remove custom .init_time hook
ARM: rockchip: remove custom .init_time hook
ARM: socfpga: remove custom .init_time hook
ARM: sti: remove custom .init_time hook
ARM: sunxi: remove custom .init_time hook
ARM: tegra: remove custom .init_time hook
ARM: vexpress: remove custom .init_time hook
ARM: vt8500: remove custom .init_time hook
arch/arm/kernel/time.c | 27 ++---
arch/arm/mach-bcm2835/bcm2835.c | 2 -
arch/arm/mach-dove/board-dt.c | 11 --
arch/arm/mach-exynos/common.c | 8 --
arch/arm/mach-exynos/common.h | 1 -
arch/arm/mach-exynos/mach-exynos4-dt.c | 2 -
arch/arm/mach-exynos/mach-exynos5-dt.c | 2 -
arch/arm/mach-highbank/highbank.c | 23 ++---
arch/arm/mach-imx/clk-imx51-imx53.c | 29 ++----
arch/arm/mach-imx/common.h | 4 -
arch/arm/mach-imx/imx51-dt.c | 6 --
arch/arm/mach-imx/mach-imx53.c | 6 --
arch/arm/mach-imx/mach-imx6q.c | 14 +--
arch/arm/mach-imx/mach-imx6sl.c | 7 --
arch/arm/mach-imx/mach-vf610.c | 9 --
arch/arm/mach-kirkwood/board-dt.c | 8 --
arch/arm/mach-mxs/mach-mxs.c | 13 ---
arch/arm/mach-nomadik/cpu-8815.c | 36 -------
arch/arm/mach-nspire/nspire.c | 9 --
arch/arm/mach-prima2/common.c | 11 --
arch/arm/mach-prima2/common.h | 1 -
arch/arm/mach-rockchip/rockchip.c | 9 --
arch/arm/mach-socfpga/socfpga.c | 2 -
arch/arm/mach-sti/board-dt.c | 10 +-
arch/arm/mach-sunxi/sunxi.c | 10 --
arch/arm/mach-tegra/tegra.c | 9 --
arch/arm/mach-vexpress/v2m.c | 14 +--
arch/arm/mach-vt8500/common.h | 24 -----
arch/arm/mach-vt8500/vt8500.c | 6 --
drivers/clk/clk-bcm2835.c | 8 --
drivers/clk/clk-highbank.c | 10 +-
drivers/clk/clk-nomadik.c | 161 ++++++++++++++---------------
drivers/clk/clk-prima2.c | 29 ++----
drivers/clk/clk-vt8500.c | 31 ++++--
drivers/clk/mxs/clk-imx23.c | 15 +--
drivers/clk/mxs/clk-imx28.c | 16 +--
drivers/clk/sunxi/clk-sunxi.c | 11 +-
drivers/clocksource/nomadik-mtu.c | 11 ++
include/linux/clk/mxs.h | 2 -
include/linux/clk/sunxi.h | 22 ----
include/linux/platform_data/clk-nomadik.h | 2 -
41 files changed, 182 insertions(+), 449 deletions(-)
delete mode 100644 arch/arm/mach-vt8500/common.h
delete mode 100644 include/linux/clk/sunxi.h
delete mode 100644 include/linux/platform_data/clk-nomadik.h
---
Cc: Olof Johansson <olof at lixom.net>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: STEricsson <STEricsson_nomadik_linux at list.st.com>
Cc: linux-tegra at vger.kernel.org
Cc: linux-rpi-kernel at lists.infradead.org
Cc: linux-samsung-soc at vger.kernel.org
Cc: kernel at stlinux.com
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
--
1.7.10.4
More information about the linux-rpi-kernel
mailing list