[PATCH] watchdog: Add Broadcom BCM2708 watchdog timer driver

Lubomir Rintel lkundrak at v3.sk
Fri Mar 22 08:55:07 EDT 2013


Signed-off-by: Lubomir Rintel <lkundrak at v3.sk>
Cc: Stephen Warren <swarren at wwwdotorg.org>
Cc: Wim Van Sebroeck <wim at iguana.be>
Cc: linux-rpi-kernel at lists.infradead.org
Cc: linux-watchdog at vger.kernel.org
---
 arch/arm/configs/bcm2835_defconfig |    4 +
 drivers/watchdog/Kconfig           |   11 +++
 drivers/watchdog/Makefile          |    1 +
 drivers/watchdog/bcm2835_wdt.c     |  158 ++++++++++++++++++++++++++++++++++++
 4 files changed, 174 insertions(+), 0 deletions(-)
 create mode 100644 drivers/watchdog/bcm2835_wdt.c

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 611bda2..8f1547a 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -67,6 +67,10 @@ CONFIG_I2C_BCM2835=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_BCM2835_WDT=y
+
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9fcc70c..f4e4a8e 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1098,6 +1098,17 @@ config BCM63XX_WDT
 	  To compile this driver as a loadable module, choose M here.
 	  The module will be called bcm63xx_wdt.
 
+config BCM2835_WDT
+	tristate "Broadcom BCM2835 hardware watchdog"
+	depends on ARCH_BCM2835
+	select WATCHDOG_CORE
+	help
+	  Watchdog driver for the built in watchdog hardware in Broadcom
+	  BCM2835 SoC.
+
+	  To compile this driver as a loadable module, choose M here.
+	  The module will be called bcm2835_wdt.
+
 config LANTIQ_WDT
 	tristate "Lantiq SoC watchdog"
 	depends on LANTIQ
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index a300b94..1bf5675 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
 obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
 obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
+obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
new file mode 100644
index 0000000..834f201
--- /dev/null
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -0,0 +1,158 @@
+/*
+ *  Watchdog driver for Broadcom BCM2835
+ *
+ *  Copyright (C) 2013 Lubomir Rintel <lkundrak at v3.sk>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/miscdevice.h>
+
+#define PM_RSTC				0x1c
+#define PM_RSTS				0x20
+#define PM_WDOG				0x24
+
+#define PM_PASSWORD			0x5a000000
+#define PM_RSTC_WRCFG_MASK		0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET	0x00000020
+#define PM_RSTS_HADWRH_SET		0x00000040
+
+#define PM_WDOG_TIME_SET		0x000fffff
+#define PM_RSTC_WRCFG_CLR		0xffffffcf
+#define PM_RSTC_WRCFG_SET		0x00000030
+#define PM_RSTC_WRCFG_FULL_RESET	0x00000020
+#define PM_RSTC_RESET			0x00000102
+
+#define SECS_TO_WDOG_TICKS(x) ((x) << 16)
+#define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
+
+static int heartbeat = -1;
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static void __iomem *wdt_regs;
+static DEFINE_SPINLOCK(wdog_lock);
+
+static int bcm2835_wdt_start(struct watchdog_device *wdog)
+{
+	uint32_t cur;
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdog_lock, flags);
+
+	writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) &
+				PM_WDOG_TIME_SET), wdt_regs + PM_WDOG);
+	cur = readl_relaxed(wdt_regs + PM_RSTC);
+	writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
+		  PM_RSTC_WRCFG_FULL_RESET, wdt_regs + PM_RSTC);
+
+	spin_unlock_irqrestore(&wdog_lock, flags);
+
+	return 0;
+}
+
+static int bcm2835_wdt_stop(struct watchdog_device *wdog)
+{
+	writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt_regs + PM_RSTC);
+	dev_info(wdog->dev, "Watchdog timer stopped");
+	return 0;
+}
+
+static int bcm2835_wdt_set_timeout(struct watchdog_device *wdog, unsigned int t)
+{
+	wdog->timeout = t;
+	return 0;
+}
+
+static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog)
+{
+	uint32_t ret = readl_relaxed(wdt_regs + PM_WDOG);
+	return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET);
+}
+
+static struct watchdog_ops bcm2835_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	bcm2835_wdt_start,
+	.stop =		bcm2835_wdt_stop,
+	.set_timeout =	bcm2835_wdt_set_timeout,
+	.get_timeleft =	bcm2835_wdt_get_timeleft,
+};
+
+static struct watchdog_info bcm2835_wdt_info = {
+	.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+			WDIOF_KEEPALIVEPING,
+	.identity =	"Broacom BCM2835 Watchdog timer",
+};
+
+static struct watchdog_device bcm2835_wdt_wdd = {
+	.info =		&bcm2835_wdt_info,
+	.ops =		&bcm2835_wdt_ops,
+	.min_timeout =	1,
+	.max_timeout =	WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
+};
+
+static int bcm2835_wdt_probe(struct platform_device *op)
+{
+	struct device *dev = &op->dev;
+	struct device_node *np = dev->of_node;
+
+	wdt_regs = of_iomap(np, 0);
+	if (WARN(!wdt_regs, "failed to remap watchdog regs"))
+		return -ENODEV;
+	dev_info(dev, "Broadcom BCM2835 watchdog timer");
+
+	watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev);
+	watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout);
+	return watchdog_register_device(&bcm2835_wdt_wdd);
+}
+
+static int bcm2835_wdt_remove(struct platform_device *op)
+{
+	watchdog_unregister_device(&bcm2835_wdt_wdd);
+	iounmap(wdt_regs);
+
+	return 0;
+}
+
+static void bcm2835_wdt_shutdown(struct platform_device *op)
+{
+	bcm2835_wdt_stop(&bcm2835_wdt_wdd);
+}
+
+static const struct of_device_id bcm2835_wdt_of_match[] = {
+	{ .compatible = "brcm,bcm2835-pm-wdt", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_wdt_of_match);
+
+static struct platform_driver bcm2835_wdt_driver = {
+	.probe		= bcm2835_wdt_probe,
+	.remove		= bcm2835_wdt_remove,
+	.shutdown	= bcm2835_wdt_shutdown,
+	.driver = {
+		.name =		"bcm2835-wdt",
+		.owner =	THIS_MODULE,
+		.of_match_table = bcm2835_wdt_of_match,
+	},
+};
+
+module_platform_driver(bcm2835_wdt_driver);
+
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_AUTHOR("Lubomir Rintel <lkundrak at v3.sk>");
+MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-- 
1.7.1




More information about the linux-rpi-kernel mailing list