[PATCH v7 0/3] arm64: dts: rockchip: Add FriendlyElec NanoPi R28S

[Heiko Stuebner]

On Sat, 19 Sep 2026 18:28:16 +0800, 安容 wrote:
> The NanoPi R28S is a dual gigabit Ethernet router board based on the
> Rockchip RK3528 SoC:
> 
>   https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R28S
> 
> It is closely related to the already supported NanoPi Zero2, sharing
> most of its power tree and peripheral routing. Patch 2 therefore moves
> the common parts into rk3528-nanopi.dtsi, and patch 3 adds the board on
> top of it. The split leaves the NanoPi Zero2 hardware description
> unchanged; I verified this by comparing the node and property sets of
> the dtb before and after the split, which differ only in node order,
> phandle numbering and the two renamed LED pin configuration nodes.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: arm: rockchip: Add FriendlyElec NanoPi R28S
      commit: bdcf29a379afecc02c3e99c0d1745363ad7a7407
[2/3] arm64: dts: rockchip: Split out the common NanoPi RK3528 parts
      commit: fdb087806e808ccc4963e2e5225fe16581ecb421
[3/3] arm64: dts: rockchip: Add devicetree for the FriendlyElec NanoPi R28S
      commit: c1e23f3425c49fe22e9598f8eea2fcf693950d50

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>