[PATCH v2 2/5] dt-bindings: power: reset: syscon-reboot-mode: allow supplies

[Krzysztof Kozlowski]

On 30/09/2026 13:47, Krzysztof Kozlowski wrote:
> On Tue, Sep 29, 2026 at 02:28:19PM +0400, Alexey Charkov wrote:
>> Whatever program that acts on a reboot mode runs before a full OS, so it
>> may lack the capability to enable the regulators it depends on, and a
>> reset that preserves the mode register generally leaves the regulators as
>> the previously running system left them.
>>
>> Allow a reboot mode node to name such supplies, so that they can be
>> turned on while the mode is being requested.
>>
>> Tested-by: Shawn Lin <shawn.lin at rock-chips.com>
> 
> Again fake tag.
> 
>> Signed-off-by: Alexey Charkov <alchark at flipper.net>
>> ---
>>  .../devicetree/bindings/power/reset/syscon-reboot-mode.yaml       | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
>> index 79ffc78b23ea..5ed70c87269e 100644
>> --- a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
>> +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
>> @@ -36,6 +36,14 @@ patternProperties:
>>    "^mode-.*$":
>>      maxItems: 1
>>  
>> +  "^[a-z0-9]+(-[a-z0-9]+)*-supply$":
>> +    description:
>> +      Supply that has to be powered for whatever program acts on the mode.
>> +      That could be a boot ROM with no access to regulators, and a warm reset
>> +      leaves them as the previously running system left them and not necessarily
>> +      what their expected out-of-reboot state is. Any supply described here is
>> +      enabled when a mode is requested, and stays enabled.
> 
> This looks like workaround for missing supply handling in actual
> consumers. Fix your devices instead.

Heh, I misread - you need to power this on? Then how does your board
powers itself in the first place? And how do you even solve the
incorrect - e.g. too low - voltage on these regulators?

Best regards,
Krzysztof