[PATCH v3 00/14] Add HPD support for Rockchip Analogix DP
Heiko Stübner
heiko at sntech.de
Mon Sep 28 05:02:34 PDT 2026
Hi Damon,
Am Montag, 28. September 2026, 10:14:04 Mitteleuropäische Sommerzeit schrieb Damon Ding:
> Rebase after the following two patch series:
> [0] https://lore.kernel.org/all/20260915-drm-bridge-drm_panel-cleanup-v4-0-30401d9406f3@bootlin.com/
> [1] https://lore.kernel.org/all/20260916-drm-bridge-every-panel-v3-0-83afb4f1a707@bootlin.com/
>
> This series improves the HPD (Hotplug Detect) interrupt handling in
> the Analogix DP driver to enable reliable native HPD pin detection on
> Rockchip platforms, and introduces platform-specific HPD detection
> schemes with fine-grained interrupt control.
on my eDP panel with gpio-hotplug via the dp-connector as before, I get
a successful display output even on boot.
- plugged in on boot - display works / reported as connected
- plugged out - correctly reported as disconnected
- plugged in again - display works / reported as connected
- unplugged on boot - correctly reported as disconnected
- plugged in - display works / reported as connected
Multiple plugin/plugout operations afterwards also worked nicely.
So
Tested-by: Heiko Stuebner <heiko at sntech.de>
Will do reviewing of patches now ;-)
Thanks for working on that
Heiko
More information about the Linux-rockchip
mailing list