[PATCH 2/4] arm64: dts: rockchip: Remove cap-sd-highspeed on Rock Pi S eMMC

[Jonas Karlman]

Hi,

On 9/23/2026 9:11 AM, Shawn Lin wrote:
> cap-sd-highspeed declares SD high-speed support and has no place on
> the non-removable eMMC node. Drop it.
> 
> Signed-off-by: Shawn Lin <shawn.lin at rock-chips.com>
> ---
> 
>  arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
> index c1e3098..677d129 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
> @@ -133,7 +133,6 @@
>  
>  &emmc {
>  	cap-mmc-highspeed;
> -	cap-sd-highspeed;

The Rock Pi S board has two similar revisions that is supported by this
DT, one has onboard SD NAND Flash and the other one has onboard eMMC
supported by the emmc dw-mshc.

So this board should have both cap-mmc-highspeed and cap-sd-highspeed
here to support best speed depending on board revision.

Regards,
Jonas

>  	no-sdio;
>  	non-removable;
>  	pinctrl-names = "default";