[PATCH v8 0/5] Add eDP lane mapping support

[Luca Ceresoli]

On Fri, 28 Aug 2026 14:51:48 +0800, Damon Ding wrote:
> This series adds configurable eDP physical lane mapping support via
> device tree data-lanes property.
> 
> Lane mapping is mainly used for below scenarios:
> 1. Correct PCB lane swap and differential line routing crossover
>    without hardware changes;
> 2. Adapt mismatched lane pin definitions between SoC and eDP panel;
> 3. Support multiple panel hardware variants on the same board
>    by configuring data-lanes in device tree only.
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: display: bridge: analogix-dp: Add data-lanes support for endpoint
      commit: af9b0fc07000db17656580fd38e5ff27c36c2ab9
[2/5] drm/dp: Add helper to validate DP lane counts
      commit: 6eac4c8bb10302abc0ea0bd1d506c46ec789ce2b
[3/5] drm/bridge: analogix_dp: Restore mandatory samsung DP DT properties
      commit: 02f569dd66c94dd67b2586f776235cf4177409ed
[4/5] drm/bridge: analogix_dp: Add validation for samsung,lane-count property
      commit: 4ff2f941b7828042feb2971c7039c8f790a105a4
[5/5] drm/bridge: analogix_dp: Add support for optional data-lanes mapping
      commit: bf63a72ea005d5e1cc12a9ad5e228c4b44246b0f

Best regards,
-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com