[PATCH 2/2] arm64: dts: rockchip: Add devicetree for the FriendlyElec NanoPi R28S
安容 via B4 Relay
devnull+HystericalDragons.proton.me at kernel.org
Sat Sep 5 04:17:27 PDT 2026
From: 安容 <HystericalDragons at proton.me>
The NanoPi R28S is a dual gigabit Ethernet router board based on the
Rockchip RK3528 SoC, designed and developed by FriendlyElec.
Specification:
- Rockchip RK3528
- 1GB RAM
- eMMC socket (optional)
- MicroSD slot
- 1x 1000Base-T (GMAC1, Realtek RTL8211F)
- 1x 1000Base-T (PCIe, Realtek RTL8111H)
- AICSemi AIC8800D80 SDIO WiFi
- 3x LEDs (SYS, LAN, WAN)
- 1x USB 2.0 Type-C, peripheral only, shared with the 5V power input
- Reset and MaskROM buttons
- Haoyu HYM8563 RTC
- 1x USB Type-C debug UART (onboard WCH CH340E)
Assisted-by: LLM
Signed-off-by: 安容 <HystericalDragons at proton.me>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../arm64/boot/dts/rockchip/rk3528-nanopi-r28s.dts | 404 +++++++++++++++++++++
2 files changed, 405 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index b677914cd3..51a9889088 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -94,6 +94,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-vicharak-vaaman.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-armsom-sige1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-hinlink-h28k.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-nanopi-r28s.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-nanopi-zero2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2a.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-r28s.dts b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-r28s.dts
new file mode 100644
index 0000000000..b2cb124ee9
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-r28s.dts
@@ -0,0 +1,404 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2026 FriendlyElec Computer Tech. Co., Ltd.
+ * Copyright (c) 2026 安容 <HystericalDragons at proton.me>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+ model = "FriendlyElec NanoPi R28S";
+ compatible = "friendlyarm,nanopi-r28s", "rockchip,rk3528";
+
+ aliases {
+ ethernet0 = &gmac1;
+ i2c1 = &i2c1;
+ mmc0 = &sdhci;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 0>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-maskrom {
+ label = "MASK";
+ linux,code = <KEY_SETUP>;
+ press-threshold-microvolt = <0>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_key>;
+
+ button-reset {
+ debounce-interval = <50>;
+ gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>;
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&lan_led_g>, <&sys_led_r>, <&wan_led_g>;
+
+ led-lan {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_LAN;
+ gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "netdev";
+ };
+
+ led-sys {
+ color = <LED_COLOR_ID_RED>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-wan {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "off";
+ function = LED_FUNCTION_WAN;
+ gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "netdev";
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+ post-power-on-delay-ms = <100>;
+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+
+ vdd_0v9: regulator-0v9-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_ddr: regulator-1v1-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc_3v3: regulator-3v3-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_3v3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_sd: regulator-3v3-vcc-sd {
+ compatible = "regulator-fixed";
+ gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwren_l>;
+ regulator-name = "vcc3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+ };
+
+ vcc5v0_sys: regulator-5v0-vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vccio_sd: regulator-vccio-sd {
+ compatible = "regulator-gpio";
+ gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+ regulator-name = "vccio_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ states = <1800000 0x0>, <3300000 0x1>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vdd_arm: regulator-vdd-arm {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_arm";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <746000>;
+ regulator-max-microvolt = <1201000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ vdd_logic: regulator-vdd-logic {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+ pwm-supply = <&vcc5v0_sys>;
+ regulator-name = "vdd_logic";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <705000>;
+ regulator-max-microvolt = <1006000>;
+ regulator-settling-time-up-us = <250>;
+ };
+};
+
+&combphy {
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+ cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-id";
+ phy-supply = <&vcc_3v3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+ <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+ status = "okay";
+};
+
+&gpu {
+ mali-supply = <&vdd_logic>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1m0_xfer>;
+ status = "okay";
+
+ hym8563: rtc at 51 {
+ compatible = "haoyu,hym8563";
+ reg = <0x51>;
+ #clock-cells = <0>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_int_l>;
+ wakeup-source;
+ };
+};
+
+&mdio1 {
+ rgmii_phy: ethernet-phy at 1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac1_rstn_l>;
+ reset-assert-us = <20000>;
+ reset-deassert-us = <100000>;
+ reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_reset_h>;
+ reset-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_HIGH>;
+ vpcie3v3-supply = <&vcc_3v3>;
+ status = "okay";
+};
+
+&pinctrl {
+ ethernet {
+ gmac1_rstn_l: gmac1-rstn-l {
+ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gpio-keys {
+ user_key: user-key {
+ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ lan_led_g: lan-led-g {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sys_led_r: sys-led-r {
+ rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wan_led_g: wan-led-g {
+ rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pcie {
+ pcie_reset_h: pcie-reset-h {
+ rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ rtc {
+ rtc_int_l: rtc-int-l {
+ rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_pwren_l: sdmmc-pwren-l {
+ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1m0_pins>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2m0_pins>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdio0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ sd-uhs-sdr104;
+ vmmc-supply = <&vcc3v3_sd>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0m0_xfer>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m1_xfer>, <&uart2m1_ctsn>, <&uart2m1_rtsn>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usb_host0_xhci {
+ dr_mode = "peripheral";
+ extcon = <&usb2phy>;
+ maximum-speed = "high-speed";
+ phys = <&usb2phy_otg>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usb2phy {
+ status = "okay";
+};
+
+&usb2phy_otg {
+ status = "okay";
+};
--
2.55.0
More information about the Linux-rockchip
mailing list