[PATCH v17 1/7] phy: rockchip: usbdp: Disable USB3 port during normal power-on

Sebastian Reichel sebastian.reichel at collabora.com
Fri Nov 13 18:00:28 PST 2026


In the reset path, the USB3 port is disabled. This re-routes the clock
going from the PHY to the USB3 controller. This adds the same to the
normal power-on path, so that it behaves exactly the same (except that
the clocks routed to the PHY stay enabled in the reset path).

This hasn't been done so far, as it requires the recently introduced
PHY reset infrastructure to avoid the PHY PLL not locking during
startup.

Tested-by: Igor Paunovic <royalnet026 at gmail.com> # Orange Pi 5 Plus
Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 9c6d921b9191..d01a819bf794 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1051,6 +1051,9 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
 	if (udphy->status == UDPHY_MODE_NONE) {
 		rk_udphy_run_reset_handler(udphy, true);
 
+		rk_udphy_u3_port_disable(udphy, true);
+		udelay(10);
+
 		ret = rk_udphy_setup(udphy);
 		if (ret) {
 			rk_udphy_run_reset_handler(udphy, false);

-- 
2.53.0




More information about the Linux-rockchip mailing list