[PATCH v2 3/9] drm/rockchip: vop2: Fix the HDMI sync polarity on RK3588

Damon Ding damon.ding at rock-chips.com
Thu Nov 12 18:03:01 PST 2026


Hi Arun,

On 11/12/2026 4:33 PM, Arun Iyengar via B4 Relay wrote:
> From: Arun Iyengar <aiyengar1990 at gmail.com>
> 
> rk3588_set_intf_mux() passes the POLFLAG bits of the mode to
> rk3588_get_hdmi_pol(), which decodes them as DRM mode flags: the
> VSYNC_POSITIVE bit is taken for DRM_MODE_FLAG_NHSYNC and POLFLAG_DCLK_INV
> for DRM_MODE_FLAG_NVSYNC. As a result GRF_VO1_CON0 marks the HSYNC of
> every +HSync/+VSync mode (e.g. all 1080p, 2160p CTA modes) as negative
> and both syncs of -HSync/-VSync modes (e.g. 720x480, 640x480) as
> positive.

The commit msg confuses me. POLFLAG_DCLK_INV has no relation to 
DRM_MODE_FLAG_NVSYNC.

For the RK3588, the polarity relationship is:

DRM_MODE_FLAG_NHSYNC -> Set HDMI hsync polarity bit
DRM_MODE_FLAG_NVSYNC -> Set HDMI vsync polarity bit
DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE -> No valid HDMI dclk polarity bit

> 
> The bits in GRF_VO1_CON0 are set for a negative sync; that is how the
> vendor kernel programs them (vop2_get_hdmi_pol(), called with the mode
> flags, sets them for DRM_MODE_FLAG_NHSYNC/NVSYNC on RK3588). Decode the
> POLFLAG bits accordingly.
> 
> Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
> Signed-off-by: Arun Iyengar <aiyengar1990 at gmail.com>
> ---
>   drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 10 +++++++---
>   1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> index 659fd0a3ab63..7c48b440cb29 100644
> --- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> +++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
> @@ -1687,12 +1687,16 @@ static u32 rk3588_get_mipi_port_mux(int vp_id)
>   		return 0;
>   }
>   
> -static u32 rk3588_get_hdmi_pol(u32 flags)
> +/*
> + * The HDMI sync polarity bits in GRF_VO1_CON0 are set for an active low
> + * (negative) sync.
> + */
> +static u32 rk3588_get_hdmi_pol(u32 polflags)
>   {
>   	u32 val;
>   
> -	val = (flags & DRM_MODE_FLAG_NHSYNC) ? BIT(HSYNC_POSITIVE) : 0;
> -	val |= (flags & DRM_MODE_FLAG_NVSYNC) ? BIT(VSYNC_POSITIVE) : 0;
> +	val = (polflags & BIT(HSYNC_POSITIVE)) ? 0 : BIT(HSYNC_POSITIVE);
> +	val |= (polflags & BIT(VSYNC_POSITIVE)) ? 0 : BIT(VSYNC_POSITIVE);
>   
>   	return val;
>   }
> 

With the commit msg modification:

Reviewed-by: Damon Ding <damon.ding at rock-chips.com>

Best regards,
Damon




More information about the Linux-rockchip mailing list