[PATCH v6 8/9] phy: rockchip-samsung-dcphy: Add MIPI D-PHY receiver support

Michael Riesch michael.riesch at collabora.com
Wed Nov 11 07:22:38 PST 2026


Hi Jason,

Thanks for the patch!

On 11/10/26 09:18, Jason Yang wrote:
> [...]
> +static int samsung_mipi_dphy_rx_power_on(struct samsung_mipi_dcphy *samsung)
> +{
> +	struct samsung_mipi_phy *rx = &samsung->rx;
> +	int ret;
> +
> +	if (!rx->hs_clk_rate || !rx->lanes)
> +		return -EINVAL;
> +
> +	reset_control_assert(samsung->s_phy_rst);
> +
> +	samsung_mipi_dphy_rx_config_common(samsung);
> +	samsung_mipi_dphy_rx_config_settle(samsung);
> +
> +	ret = samsung_mipi_dphy_rx_lane_enable(samsung);
> +
> +	reset_control_deassert(samsung->s_phy_rst);
> +
> +	return ret;
> +}
> +
> +static int samsung_mipi_dphy_rx_power_off(struct samsung_mipi_dcphy *samsung)
> +{
> +	reset_control_assert(samsung->s_phy_rst);

I wonder whether this is really a D-PHY specific thing. You can keep it
as is for now, I'll try to bring up the C-PHY part on top of your
series, and then we'll see.

> [...]
>  static const struct phy_ops samsung_mipi_dcphy_tx_ops = {
>  	.configure = samsung_mipi_dcphy_tx_configure,
>  	.power_on  = samsung_mipi_dcphy_tx_power_on,
> @@ -1535,6 +1905,15 @@ static const struct phy_ops samsung_mipi_dcphy_tx_ops = {
>  	.owner	   = THIS_MODULE,
>  };
>  
> +static const struct phy_ops samsung_mipi_dcphy_rx_ops = {
> +	.configure = samsung_mipi_dcphy_rx_configure,
> +	.power_on  = samsung_mipi_dcphy_rx_power_on,
> +	.power_off = samsung_mipi_dcphy_rx_power_off,
> +	.init = samsung_mipi_dcphy_init,
> +	.exit = samsung_mipi_dcphy_exit,
> +	.owner	   = THIS_MODULE,

Nit: either align all = or just use a single space (personally I would
prefer the latter).

> [...]
Looks all good to me!

Reviewed-by: Michael Riesch <michael.riesch at collabora.com>

Best regards,
Michael




More information about the Linux-rockchip mailing list