[PATCH v5 3/6] phy: rockchip: inno-usb2: ignore reset_control return codes

[Sebastian Reichel]

Asserting or deasserting reset lines for the Rockchip MMIO based reset
controller never fails. Drop error handling for it from the driver to
simplify the logic.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 31 ++++++---------------------
 1 file changed, 6 insertions(+), 25 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index a705c4b18bd4..6b3104901695 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -290,23 +290,12 @@ static inline bool property_enabled(struct regmap *base,
 	return tmp != reg->disable;
 }
 
-static int rockchip_usb2phy_reset(struct rockchip_usb2phy *rphy)
+static void rockchip_usb2phy_reset(struct rockchip_usb2phy *rphy)
 {
-	int ret;
-
-	ret = reset_control_assert(rphy->phy_reset);
-	if (ret)
-		return ret;
-
+	reset_control_assert(rphy->phy_reset);
 	udelay(10);
-
-	ret = reset_control_deassert(rphy->phy_reset);
-	if (ret)
-		return ret;
-
+	reset_control_deassert(rphy->phy_reset);
 	usleep_range(100, 200);
-
-	return 0;
 }
 
 static void rockchip_usb2phy_clk_bulk_disable(void *data)
@@ -559,9 +548,7 @@ static int rockchip_usb2phy_power_on(struct phy *phy)
 	 * please keep the common_on_n 1'b0 to set these blocks
 	 * remain powered.
 	 */
-	ret = rockchip_usb2phy_reset(rphy);
-	if (ret)
-		return ret;
+	rockchip_usb2phy_reset(rphy);
 
 	/* waiting for the utmi_clk to become stable */
 	usleep_range(1500, 2000);
@@ -1479,16 +1466,13 @@ static int rk3528_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 
 static int rk3576_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 {
-	int ret;
 	u32 reg = rphy->phy_cfg->reg;
 
 	/* Deassert SIDDQ to power on analog block */
 	regmap_write(rphy->grf, reg + 0x0010, GENMASK(29, 29) | 0x0000);
 
 	/* Do reset after exit IDDQ mode */
-	ret = rockchip_usb2phy_reset(rphy);
-	if (ret)
-		return ret;
+	rockchip_usb2phy_reset(rphy);
 
 	/* HS DC Voltage Level Adjustment 4'b1001 : +5.89% */
 	regmap_write(rphy->grf, reg + 0x000c, GENMASK(27, 24) | 0x0900);
@@ -1501,7 +1485,6 @@ static int rk3576_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 
 static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 {
-	int ret;
 	bool usb3otg = false;
 	/*
 	 * utmi_termselect = 1'b1 (en FS terminations)
@@ -1524,9 +1507,7 @@ static int rk3588_usb2phy_tuning(struct rockchip_usb2phy *rphy)
 	regmap_write(rphy->grf, 0x0008, GENMASK(29, 29) | 0x0000);
 
 	/* Do reset after exit IDDQ mode */
-	ret = rockchip_usb2phy_reset(rphy);
-	if (ret)
-		return ret;
+	rockchip_usb2phy_reset(rphy);
 
 	/* suspend configuration */
 	regmap_write(rphy->grf, 0x000c, GENMASK(20, 16) | suspend_cfg);

-- 
2.53.0