[PATCH 4/5] arm64: dts: rockchip: Add DSI panel to RK3588 EVB1

[Sebastian Reichel]

Hi,

On Mon, Nov 09, 2026 at 02:26:44PM +0100, Heiko Stübner wrote:
> Am Montag, 9. November 2026, 02:31:35 Mitteleuropäische Normalzeit schrieb Chaoyi Chen:
> > Hi Sebastian,
> > On 11/9/2026 3:42 AM, Sebastian Reichel wrote:
> > > Hello Chaoyi,
> > > 
> > > On Sun, Nov 08, 2026 at 11:15:09AM +0800, Chaoyi Chen wrote:
> > >> Hi Sebastian,
> > >>
> > >> On 11/7/2026 5:57 AM, Sebastian Reichel wrote:
> > >>> The RK3588 EVB1 comes with a W552793DBA-V10 Touchscreen/Display
> > >>> combination. It contains a Wanchanglong W552793BAA panel and a
> > >>> Goodix GT1158 touchscreen. This adds the DT description of it.
> > >>> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
> > >>> ---
> > >>>  arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 90 ++++++++++++++++++++++++
> > >>>  1 file changed, 90 insertions(+)
> > >>>
> > >>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> > >>> index 6a95a8bb6fb8..327ca13b60f0 100644
> > >>> --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> > >>> +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
> > >>> @@ -204,6 +204,15 @@ vcc12v_dcin: regulator-vcc12v-dcin {
> > >>>  		regulator-max-microvolt = <12000000>;
> > >>>  	};
> > >>>  
> > >>
> > >> I seem unable to apply the patch to the latest linux-next tree.
> > >>
> > >> So I tried to resolve the conflict manually, but the actual
> > >> test screen did not display. I will look into this further.
> > > 
> > > Strange. The base of this series was Heiko's for-next tree from
> > > Friday. No RK3588 EVB1 patches landed since then:
> > > 
> > > https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/commit/?h=for-next&id=cabb6811c38a46337d5f4252b4dc390f9296856c
> > > 
> > > If your board uses the original Rockchip bootloader, which shows a
> > > Rockchip logo on the panel, you also need Cristian's latest YUV420
> > > patches that reset VOP2 at probe time avoiding some issues with the
> > > pre-initialized panel as a side effect. Those were recently applied
> > > by Heiko to the DRM tree, so testing on linux-next is indeed
> > > sensible.
> > > 
> > 
> > Hmm, the newest linux-next tag which I used is next-20261105, and Heiko's 
> > tree last updated date is1106. I'll give it a try on Heiko's tree.
> > 
> > And I'm using mainline U-Boot, which obtained from the latest nightly build:
> > https://gitlab.collabora.com/hardware-enablement/rockchip-3588/debian-image-recipes.
> > 
> > The backlight working correctly, and the DCS command has been sent, but nothing display.
> > Perhaps I should look elsewhere.
> 
> I would assume it could be the SPLL (again).
> 
> I.e. a recent u-boot change broke the SPL-based forced clock init and Jonas
> fixed that in [0]. Had the black display again recently too.
> 
> And it seems it hasn't been merged yet.

Sounds reasonable. FWIW I only tested with the pre-flashed Rockchip
U-Boot (as described above). I intentionally keep that on my RK3588
EVB1, so that I can test RK3588 with vendor TF-A/U-Boot and upstream
or downstream kernel. All my other boards run upstream TF-A/U-Boot.

Greetings,

-- Sebastian
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-rockchip/attachments/20261109/aa75e05a/attachment.sig>