[PATCH v16 14/16] arm64: dts: rockchip: add NPU core domain clocks and resets to rk3576

[Jiaxing Hu]

The two NPU cores of the RK3576 share the CBUF and the DSU, so PD_NPU0
and PD_NPU1 also need the three clocks that PD_NPUTOP already lists.

Also add a BIU reset to each NPU power domain. The pmdomain driver cycles
it when the domain powers on, so the bus interface works.

Signed-off-by: Jiaxing Hu <gahing at gahingwoo.com>
---
 arch/arm64/boot/dts/rockchip/rk3576.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index 7828736bf9ac..508ed48b7bee 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -1159,14 +1159,22 @@ power-domain at RK3576_PD_NPUTOP {
 						power-domain at RK3576_PD_NPU0 {
 							reg = <RK3576_PD_NPU0>;
 							clocks = <&cru HCLK_RKNN_ROOT>,
-								 <&cru ACLK_RKNN0>;
+								 <&cru ACLK_RKNN0>,
+								 <&cru CLK_RKNN_DSU0>,
+								 <&cru ACLK_RKNN_CBUF>,
+								 <&cru HCLK_RKNN_CBUF>;
+							resets = <&cru SRST_A_RKNN0_BIU>;
 							pm_qos = <&qos_npu_m0>;
 							#power-domain-cells = <0>;
 						};
 						power-domain at RK3576_PD_NPU1 {
 							reg = <RK3576_PD_NPU1>;
 							clocks = <&cru HCLK_RKNN_ROOT>,
-								 <&cru ACLK_RKNN1>;
+								 <&cru ACLK_RKNN1>,
+								 <&cru CLK_RKNN_DSU0>,
+								 <&cru ACLK_RKNN_CBUF>,
+								 <&cru HCLK_RKNN_CBUF>;
+							resets = <&cru SRST_A_RKNN1_BIU>;
 							pm_qos = <&qos_npu_m1>;
 							#power-domain-cells = <0>;
 						};
-- 
2.43.0