[PATCH v2 12/27] drm/rockchip: dw_hdmi_qp: Add VRR support

[Nicolas Frattaroli]

Register the vrr_capable property on the connector for RK3588, where VRR
is implemented, as well as the other VRR connector properties.

In the encoder's atomic_check callback, the vrr_capable property, if
present, is then set to true if the sink supports VRR. The display limit
properties are also updated accordingly there, using the helper.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
---
 drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c | 30 ++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
index f2a1ea8dfefa..dcde50bca36b 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
@@ -89,6 +89,9 @@
 #define RK_COLOR_FMT_YUV444		0x2
 #define RK_COLOR_FMT_YUV420		0x3
 
+#define RK_VRR_DISPLAY_MODES		(BIT(VRR_DISPLAY_MODE_GAME) | \
+					 BIT(VRR_DISPLAY_MODE_OFF))
+
 struct rockchip_hdmi_qp {
 	struct device *dev;
 	struct regmap *regmap;
@@ -195,6 +198,7 @@ dw_hdmi_qp_rockchip_encoder_atomic_check(struct drm_encoder *encoder,
 					 struct drm_crtc_state *crtc_state,
 					 struct drm_connector_state *conn_state)
 {
+	struct drm_connector *connector = conn_state->connector;
 	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
 	struct rockchip_hdmi_qp *hdmi = to_rockchip_hdmi_qp(encoder);
 	union phy_configure_opts phy_cfg = {};
@@ -205,6 +209,12 @@ dw_hdmi_qp_rockchip_encoder_atomic_check(struct drm_encoder *encoder,
 	if (ingest_fmt < 0)
 		return -EINVAL;
 
+	if (connector->vrr_capable_property) {
+		drm_connector_set_vrr_capable_property(connector,
+			drm_display_info_is_vrr_capable(&connector->display_info));
+		drm_connector_hdmi_update_vrr_limits(connector, &crtc_state->mode);
+	}
+
 	if (hdmi->tmds_char_rate == conn_state->hdmi.tmds_char_rate &&
 	    s->output_bpc == conn_state->hdmi.output_bpc &&
 	    s->bus_format == ingest_fmt)
@@ -552,6 +562,7 @@ struct rockchip_hdmi_qp_cfg {
 	unsigned int port_ids[MAX_HDMI_PORT_NUM];
 	const struct rockchip_hdmi_qp_ctrl_ops *ctrl_ops;
 	const struct dw_hdmi_qp_phy_ops *phy_ops;
+	bool supports_vrr;
 };
 
 static const struct rockchip_hdmi_qp_cfg rk3576_hdmi_cfg = {
@@ -571,6 +582,7 @@ static const struct rockchip_hdmi_qp_cfg rk3588_hdmi_cfg = {
 	},
 	.ctrl_ops = &rk3588_hdmi_ctrl_ops,
 	.phy_ops = &rk3588_hdmi_phy_ops,
+	.supports_vrr = true,
 };
 
 static const struct of_device_id dw_hdmi_qp_rockchip_dt_ids[] = {
@@ -729,6 +741,24 @@ static int dw_hdmi_qp_rockchip_bind(struct device *dev, struct device *master,
 		return dev_err_probe(dev, PTR_ERR(connector),
 				     "Failed to init bridge connector\n");
 
+	if (cfg->supports_vrr) {
+		ret = drm_connector_attach_vrr_capable_property(connector);
+		if (ret)
+			return dev_err_probe(hdmi->dev, ret,
+					     "Failed to attach 'vrr_capable' property\n");
+
+		ret = drm_connector_attach_vrr_display_mode_property(connector,
+								     RK_VRR_DISPLAY_MODES);
+		if (ret)
+			return dev_err_probe(hdmi->dev, ret,
+					     "Failed to attach 'vrr_display_mode' property\n");
+
+		ret = drm_connector_attach_vrr_display_limits_properties(connector);
+		if (ret)
+			return dev_err_probe(hdmi->dev, ret,
+					     "Failed to attach VRR display limits properties\n");
+	}
+
 	platform_set_drvdata(pdev, hdmi);
 
 	return 0;

-- 
2.56.0