[PATCH v8 7/9] PCI: dw-rockchip: Add pme_turn_off support

[Shawn Lin]

在 2026/11/05 星期四 7:47, Sebastian Reichel 写道:
> Prepare Rockchip PCIe controller for system suspend support by
> adding the PME turn off operation.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
> ---
>   drivers/pci/controller/dwc/pcie-dw-rockchip.c | 47 +++++++++++++++++++++++++++
>   1 file changed, 47 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> index 0e26abc50920..7933c50df340 100644
> --- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> +++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
> @@ -47,6 +47,10 @@
>   #define  PCIE_CLIENT_ENABLE_LTSSM	FIELD_PREP_WM16(BIT(2), 1)
>   #define  PCIE_CLIENT_DISABLE_LTSSM	FIELD_PREP_WM16(BIT(2), 0)
>   
> +/* Interrupt Status Register for Received Messages */
> +#define PCIE_CLIENT_INTR_STATUS_MSG_RX	0x04
> +#define  PME_TO_ACK			BIT(9)
> +
>   /* Interrupt Status Register Related to Legacy Interrupt */
>   #define PCIE_CLIENT_INTR_STATUS_LEGACY	0x8
>   
> @@ -71,6 +75,11 @@
>   #define  PCIE_CLKREQ_READY		FIELD_PREP_WM16(BIT(0), 1)
>   #define  PCIE_CLKREQ_NOT_READY		FIELD_PREP_WM16(BIT(0), 0)
>   #define  PCIE_CLKREQ_PULL_DOWN		FIELD_PREP_WM16(GENMASK(13, 12), 1)
> +#define  PME_READY_ENTER_L23		BIT(3)
> +
> +/* Message Request Register */
> +#define PCIE_CLIENT_MSG_GEN		0x34
> +#define  PME_TURN_OFF			FIELD_PREP_WM16(BIT(4), 1)
>   
>   /* RASDES TBA information */
>   #define PCIE_CLIENT_CDM_RASDES_TBA_INFO_CMN	0x154
> @@ -439,8 +448,46 @@ static int rockchip_pcie_host_init(struct dw_pcie_rp *pp)
>   	return 0;
>   }
>   
> +static void rockchip_pcie_pme_turn_off(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct rockchip_pcie *rockchip = to_rockchip_pcie(pci);
> +	struct device *dev = rockchip->pci.dev;
> +	u32 status;
> +	int ret;
> +
> +	/* 1. Broadcast PME_Turn_Off Message, bit 4 self-clear once done */
> +	rockchip_pcie_writel_apb(rockchip, PME_TURN_OFF, PCIE_CLIENT_MSG_GEN);
> +	ret = readl_poll_timeout(rockchip->apb_base + PCIE_CLIENT_MSG_GEN,
> +				 status, !(status & BIT(4)), PCIE_PME_TO_L2_TIMEOUT_US / 10,
> +				 PCIE_PME_TO_L2_TIMEOUT_US);
> +	if (ret) {
> +		dev_warn(dev, "Failed to send PME_Turn_Off\n");
> +		return;
> +	}
> +
> +	/* 2. Wait for PME_TO_Ack, bit 9 will be set once received */
> +	ret = readl_poll_timeout(rockchip->apb_base + PCIE_CLIENT_INTR_STATUS_MSG_RX,
> +				 status, status & BIT(9), PCIE_PME_TO_L2_TIMEOUT_US / 10,
> +				 PCIE_PME_TO_L2_TIMEOUT_US);
> +	if (ret) {
> +		dev_warn(dev, "Failed to receive PME_TO_Ack\n");
> +		return;
> +	}
> +
> +	/* 3. Clear PME_TO_Ack and Wait for ready to enter L23 message */
> +	rockchip_pcie_writel_apb(rockchip, PME_TO_ACK, PCIE_CLIENT_INTR_STATUS_MSG_RX);
> +	ret = readl_poll_timeout(rockchip->apb_base + PCIE_CLIENT_POWER_CON,
> +				 status, status & PME_READY_ENTER_L23,
> +				 PCIE_PME_TO_L2_TIMEOUT_US / 10,
> +				 PCIE_PME_TO_L2_TIMEOUT_US);
> +	if (ret)
> +		dev_err(dev, "Failed to get ready to enter L23 message\n");
> +}


This is a question for the DWC core: should we change
dw_pcie_host_ops::pme_turn_off() to return a value instead of silently
ignoring a failure?

Looking at pcie-designware-host.c, we have:

if (pci->pp.ops->pme_turn_off) {
     pci->pp.ops->pme_turn_off(&pci->pp);
} else {
     ret = dw_pcie_pme_turn_off(pci);
     if (ret)
         return ret;
}

The handling feels asymmetric. If ->pme_turn_off fails, shouldn't we 
abort dw_pcie_suspend_noirq as well?

Other than that, this patch looks good to me in current shape,
Reviewed-by: Shawn Lin <shawn.lin at rock-chips.com>

We can further discuss the callback's return value issue on top.

> +
>   static const struct dw_pcie_host_ops rockchip_pcie_host_ops = {
>   	.init = rockchip_pcie_host_init,
> +	.pme_turn_off = rockchip_pcie_pme_turn_off,
>   };
>   
>   /*
>