[PATCH v2 0/3] arm64: dts: rockchip: Add NanoPi M6V2 board

[Joachim Eastwood via B4 Relay]

This short patch series add support for the NanoPi M6V2. The board is
very similar to the original M6 with only a few differences.

Differences:
* New audio CODEC (Everest ES8389)
* New Ethernet PHY (MotorComm YT8531C)
* 1 extra user button
* Misc connector changes on the board

Patch 1 documents the NanoPi M6V2 board compatibility string.
Patch 2 remove reference to the rtl8211f phy from common dtsi.
Patch 3 adds the NanoPi M6V2 device tree.

Link to schematic:
https://wiki.friendlyelec.com/wiki/images/b/b6/NanoPi_M6V2_2603_SCH.pdf

Based on linux-rockchip v7.5-armsoc/dts64 branch.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
Changes in v2:
- Fix title of patch 3 - Sashiko
- Fix I2S clock copy-past mistake in patch 3 - Sashiko
- Dropped the generic phy compatibility since it won't work - Sashiko
- Add acked-by to patch 1 - Krzysztof
- Add new patch which remove reference to the rtl8211f phy
- Rebase on linux-rockchip v7.5-armsoc/dts64 branch
- Link to v1: https://patch.msgid.link/20261101-nanopi-m6v2-v1-0-e401ea64b394@gmail.com

---
Joachim Eastwood (3):
      dt-bindings: arm: rockchip: add FriendlyElec NanoPi M6V2
      arm64: dts: rockchip: rename rtl8211f node on rk3588s-nanopi
      arm64: dts: rockchip: add support for NanoPi M6V2 board

 .../devicetree/bindings/arm/rockchip.yaml          |  1 +
 arch/arm64/boot/dts/rockchip/Makefile              |  1 +
 .../boot/dts/rockchip/rk3588s-nanopi-m6v2.dts      | 94 ++++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi.dtsi   | 12 +--
 4 files changed, 102 insertions(+), 6 deletions(-)
---
base-commit: 80e2828a00ba4f472289a699727abfd72a31de34
change-id: 20261014-nanopi-m6v2-c6d0708951e7

Best regards,
--  
Joachim Eastwood <joachim.eastwood at gmail.com>