[PATCH v7 10/10] PCI: dw-rockchip: Clear debug buffer before entering L2

[Sebastian Reichel]

Clear the debug buffer before entering the L2 state to ease debugging
link training issues on resume. The register latches link/LTSSM status.
Clearing it at suspend means post-resume diagnostics reflect the new
link bring-up, and not pre-suspend residue.

Cc: Shawn Lin <shawn.lin at rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 drivers/pci/controller/dwc/pcie-dw-rockchip.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
index 75b40091bb95..66b3d31d7bc9 100644
--- a/drivers/pci/controller/dwc/pcie-dw-rockchip.c
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -81,6 +81,9 @@
 #define PCIE_CLIENT_MSG_GEN		0x34
 #define  PME_TURN_OFF			FIELD_PREP_WM16(BIT(4), 1)
 
+/* General Debug Register */
+#define PCIE_CLIENT_GENERAL_DEBUG	0x104
+
 /* RASDES TBA information */
 #define PCIE_CLIENT_CDM_RASDES_TBA_INFO_CMN	0x154
 #define  PCIE_CLIENT_CDM_RASDES_TBA_L1_1	BIT(4)
@@ -1039,6 +1042,11 @@ static int rockchip_pcie_rc_reset_root_port(struct pci_host_bridge *bridge,
 	return ret;
 }
 
+static void rockchip_pcie_link_status_clear(struct rockchip_pcie *rockchip)
+{
+	rockchip_pcie_writel_apb(rockchip, 0x0, PCIE_CLIENT_GENERAL_DEBUG);
+}
+
 static int rockchip_pcie_suspend(struct device *dev)
 {
 	struct rockchip_pcie *rockchip = dev_get_drvdata(dev);
@@ -1050,6 +1058,8 @@ static int rockchip_pcie_suspend(struct device *dev)
 
 	rockchip->intx = rockchip_pcie_readl_apb(rockchip, PCIE_CLIENT_INTR_MASK_LEGACY);
 
+	rockchip_pcie_link_status_clear(rockchip);
+
 	ret = dw_pcie_suspend_noirq(pci);
 	if (ret)
 		return ret;

-- 
2.53.0