[PATCH V7 4/6] drm/panel: anbernic-td4310: Add RG Vita Pro panel
neil.armstrong at linaro.org
neil.armstrong at linaro.org
Mon Jun 15 01:18:58 PDT 2026
On 6/10/26 16:44, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
>
> The panel used by Anbernic in the RG Vita-Pro is a DSI panel based
> on the TD4310 controller IC. It measures approximately 5.5 inches
> diagonally and is 1080x1920 in resolution.
>
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
> drivers/gpu/drm/panel/Kconfig | 10 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-anbernic-td4310.c | 257 ++++++++++++++++++
> 3 files changed, 268 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-anbernic-td4310.c
>
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index d592f4f4b939..61dd00297ecc 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -17,6 +17,16 @@ config DRM_PANEL_ABT_Y030XX067A
> Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
> and RG-99 handheld gaming consoles.
>
> +config DRM_PANEL_ANBERNIC_TD4310
> + tristate "Anbernic TD4310 LCD panel"
> + depends on GPIOLIB && OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here to enable support for Anbernic designed panels with the
> + TD4310 panel controller such as the ones used on the Anbernic RG
> + Vita Pro.
> +
> config DRM_PANEL_ARM_VERSATILE
> tristate "ARM Versatile panel driver"
> depends on OF
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index a4291dc3905b..9d8f70c9de3e 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-$(CONFIG_DRM_PANEL_ABT_Y030XX067A) += panel-abt-y030xx067a.o
> +obj-$(CONFIG_DRM_PANEL_ANBERNIC_TD4310) += panel-anbernic-td4310.o
> obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
> obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.o
> obj-$(CONFIG_DRM_PANEL_AUO_A030JTN01) += panel-auo-a030jtn01.o
> diff --git a/drivers/gpu/drm/panel/panel-anbernic-td4310.c b/drivers/gpu/drm/panel/panel-anbernic-td4310.c
> new file mode 100644
> index 000000000000..9a1b4525423c
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-anbernic-td4310.c
> @@ -0,0 +1,257 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Driver for Anbernic panels with TD4310 panel controller.
> + *
> + * Copyright (C) 2026 Chris Morgan <macromorgan at hotmail.com>
> + *
> + */
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_probe_helper.h>
> +
> +#include <video/mipi_display.h>
> +
> +struct anbernic_panel_td4310_info {
> + const struct drm_display_mode *display_mode;
> + u16 width_mm;
> + u16 height_mm;
> + u32 bus_flags;
> + unsigned long mode_flags;
> + u32 format;
> + u32 lanes;
> + u16 prepare_delay;
> + u16 reset_delay;
> + u16 init_delay;
> + u16 enable_delay;
> + u16 disable_delay;
> + u16 unprepare_delay;
> +};
> +
> +struct anbernic_panel_td4310 {
> + struct device *dev;
> + struct mipi_dsi_device *dsi;
> + struct drm_panel panel;
> + const struct anbernic_panel_td4310_info *panel_info;
> + struct gpio_desc *reset_gpio;
> + struct gpio_desc *enable_gpio;
> + struct regulator *vdd;
> + enum drm_panel_orientation orientation;
> +};
> +
> +static inline struct anbernic_panel_td4310 *panel_to_anbernic_panel_td4310(struct drm_panel *panel)
> +{
> + return container_of(panel, struct anbernic_panel_td4310, panel);
> +}
> +
> +static int panel_anbernic_td4310_prepare(struct drm_panel *panel)
> +{
> + struct anbernic_panel_td4310 *ctx = panel_to_anbernic_panel_td4310(panel);
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
> + int ret;
> +
> + ret = regulator_enable(ctx->vdd);
> + if (ret)
> + return ret;
> +
> + ret = gpiod_set_value_cansleep(ctx->enable_gpio, 1);
> + if (ret)
> + goto err_enable;
> +
> + if (ctx->panel_info->enable_delay)
> + mipi_dsi_msleep(&dsi_ctx, ctx->panel_info->enable_delay);
> +
> + ret = gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> + if (ret)
> + goto err_reset;
> +
> + mipi_dsi_msleep(&dsi_ctx, 10);
> +
> + ret = gpiod_set_value_cansleep(ctx->reset_gpio, 0);
> + if (ret)
> + goto err_reset;
> +
> + if (ctx->panel_info->reset_delay)
> + mipi_dsi_msleep(&dsi_ctx, ctx->panel_info->reset_delay);
> +
> + mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, ctx->panel_info->prepare_delay);
> + mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, ctx->panel_info->prepare_delay);
> +
> + if (dsi_ctx.accum_err) {
> + ret = dsi_ctx.accum_err;
> + goto err_reset;
> + }
> +
> + return 0;
> +
> +err_reset:
> + gpiod_set_value_cansleep(ctx->enable_gpio, 0);
> +err_enable:
> + regulator_disable(ctx->vdd);
> + return ret;
> +}
> +
> +static int panel_anbernic_td4310_unprepare(struct drm_panel *panel)
> +{
> + struct anbernic_panel_td4310 *ctx = panel_to_anbernic_panel_td4310(panel);
> + struct mipi_dsi_device *dsi = ctx->dsi;
> + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi };
> +
> + mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, ctx->panel_info->unprepare_delay);
> + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
> + mipi_dsi_msleep(&dsi_ctx, ctx->panel_info->disable_delay);
> +
> + gpiod_set_value_cansleep(ctx->enable_gpio, 0);
> +
> + gpiod_set_value_cansleep(ctx->reset_gpio, 1);
> +
> + regulator_disable(ctx->vdd);
> +
> + return 0;
> +}
> +
> +static int panel_anbernic_td4310_get_mode(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct anbernic_panel_td4310 *ctx = panel_to_anbernic_panel_td4310(panel);
> + const struct anbernic_panel_td4310_info *panel_info = ctx->panel_info;
> +
> + connector->display_info.bpc = 8;
> + connector->display_info.width_mm = panel_info->width_mm;
> + connector->display_info.height_mm = panel_info->height_mm;
> + connector->display_info.bus_flags = panel_info->bus_flags;
> +
> + return drm_connector_helper_get_modes_fixed(connector, panel_info->display_mode);
> +}
> +
> +static enum drm_panel_orientation panel_anbernic_td4310_get_orientation(struct drm_panel *panel)
> +{
> + struct anbernic_panel_td4310 *ctx = panel_to_anbernic_panel_td4310(panel);
> +
> + return ctx->orientation;
> +}
> +
> +static const struct drm_panel_funcs panel_anbernic_td4310_funcs = {
> + .prepare = panel_anbernic_td4310_prepare,
> + .unprepare = panel_anbernic_td4310_unprepare,
> + .get_modes = panel_anbernic_td4310_get_mode,
> + .get_orientation = panel_anbernic_td4310_get_orientation,
> +};
> +
> +static int panel_anbernic_td4310_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct anbernic_panel_td4310 *ctx;
> + int ret;
> +
> + ctx = devm_drm_panel_alloc(dev, struct anbernic_panel_td4310, panel,
> + &panel_anbernic_td4310_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> + if (IS_ERR(ctx))
> + return PTR_ERR(ctx);
> +
> + ctx->dev = dev;
> +
> + ctx->panel_info = of_device_get_match_data(dev);
> + if (!ctx->panel_info)
> + return -EINVAL;
> +
> + ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to get panel orientation\n");
> +
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->reset_gpio))
> + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
> + "Cannot get reset gpio\n");
> +
> + ctx->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_LOW);
> + if (IS_ERR(ctx->enable_gpio))
> + return dev_err_probe(dev, PTR_ERR(ctx->enable_gpio),
> + "Cannot get enable gpio\n");
> +
> + ctx->vdd = devm_regulator_get(dev, "vdd");
> + if (IS_ERR(ctx->vdd))
> + return dev_err_probe(dev, PTR_ERR(ctx->vdd),
> + "Failed to request vdd regulator\n");
> +
> + ctx->dsi = dsi;
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + dsi->lanes = ctx->panel_info->lanes;
> + dsi->format = ctx->panel_info->format;
> + dsi->mode_flags = ctx->panel_info->mode_flags;
> +
> + ret = drm_panel_of_backlight(&ctx->panel);
> + if (ret)
> + return ret;
> +
> + devm_drm_panel_add(dev, &ctx->panel);
> +
> + ret = devm_mipi_dsi_attach(dev, dsi);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode anbernic_vitapro_mode = {
> + .clock = 140020,
> + .hdisplay = 1080,
> + .hsync_start = 1080 + 50,
> + .hsync_end = 1080 + 50 + 4,
> + .htotal = 1080 + 50 + 4 + 50,
> + .vdisplay = 1920,
> + .vsync_start = 1920 + 15,
> + .vsync_end = 1920 + 15 + 4,
> + .vtotal = 1920 + 15 + 4 + 32,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +};
> +
> +static const struct anbernic_panel_td4310_info anbernic_vitapro_info = {
> + .display_mode = &anbernic_vitapro_mode,
> + .width_mm = 69,
> + .height_mm = 121,
> + .bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET |
> + MIPI_DSI_CLOCK_NON_CONTINUOUS,
> + .format = MIPI_DSI_FMT_RGB888,
> + .lanes = 4,
> + .prepare_delay = 50,
> + .reset_delay = 220,
> + .enable_delay = 120,
> + .disable_delay = 50,
> + .unprepare_delay = 20,
> +};
> +
> +static const struct of_device_id panel_anbernic_td4310_of_match[] = {
> + {
> + .compatible = "anbernic,panel-vita-pro",
> + .data = &anbernic_vitapro_info,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, panel_anbernic_td4310_of_match);
> +
> +static struct mipi_dsi_driver anbernic_panel_td4310_driver = {
> + .driver = {
> + .name = "panel-anbernic-td4310",
> + .of_match_table = panel_anbernic_td4310_of_match,
> + },
> + .probe = panel_anbernic_td4310_probe,
> +};
> +module_mipi_dsi_driver(anbernic_panel_td4310_driver);
> +
> +MODULE_AUTHOR("Chris Morgan <macromorgan at hotmail.com>");
> +MODULE_DESCRIPTION("DRM driver for Anbernic TD4310 MIPI DSI panels");
> +MODULE_LICENSE("GPL");
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
Thanks,
Neil
More information about the Linux-rockchip
mailing list