[PATCH v5 06/12] arm64: dts: rockchip: rk3588s-nanopi-r6: remove always-on and boot-on from vdd_npu_s0 reg

[Joachim Eastwood via B4 Relay]

From: Joachim Eastwood <joachim.eastwood at gmail.com>

Since the NPU is hooked up in DT, the always-on and boot-on properties
on the regulator isn't needed anymore.

Signed-off-by: Joachim Eastwood <joachim.eastwood at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index b120dd98241f..8953dcebb93e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -314,8 +314,6 @@ vdd_npu_s0: regulator at 42 {
 		regulator-min-microvolt = <550000>;
 		regulator-max-microvolt = <950000>;
 		regulator-ramp-delay = <2300>;
-		regulator-boot-on;
-		regulator-always-on;
 		vin-supply = <&vcc5v0_sys>;
 
 		regulator-state-mem {

-- 
2.55.0