[PATCH] media: hantro: release runtime resources when device_run fails

[Frank Li]

On Fri, Jul 24, 2026 at 11:15:48AM +0000, Tharit Tangkijwanichakul wrote:
> device_run() acquires a runtime PM reference and enables the VPU clocks
> before invoking the codec-specific run callback.
>
> If clk_bulk_enable() fails, the runtime PM reference is left held. If
> the codec-specific run callback fails, both the enabled clocks and the
> runtime PM reference are left held.
>
> Add separate error paths to release the resources acquired by
> device_run(). Disable the clocks when the codec run callback fails, and
> drop the runtime PM reference when either clock enabling or the codec
> run callback fails.
>
> Fixes: 775fec69008d ("media: add Rockchip VPU JPEG encoder driver")
> Signed-off-by: Tharit Tangkijwanichakul <tharitt97 at gmail.com>
> ---
> Tested on a Rockchip RK3588 (Rock 5B) board with Fluster:
>   H.264 (JVT-AVC_V1):	     129/135, unchanged
>   MPEG-2 (MPEG2_VIDEO-MAIN): 23/43, unchanged
>   VP8 (VP8-TEST-VECTORS):    61/61, unchanged
>
>  drivers/media/platform/verisilicon/hantro_drv.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/media/platform/verisilicon/hantro_drv.c b/drivers/media/platform/verisilicon/hantro_drv.c
> index 2e81877f640f..9daaf129211d 100644
> --- a/drivers/media/platform/verisilicon/hantro_drv.c
> +++ b/drivers/media/platform/verisilicon/hantro_drv.c
> @@ -170,6 +170,7 @@ void hantro_end_prepare_run(struct hantro_ctx *ctx)
>  static void device_run(void *priv)
>  {
>  	struct hantro_ctx *ctx = priv;
> +	struct hantro_dev *vpu = ctx->dev;
>  	struct vb2_v4l2_buffer *src, *dst;
>  	int ret;
>
> @@ -178,11 +179,11 @@ static void device_run(void *priv)
>
>  	ret = pm_runtime_resume_and_get(ctx->dev->dev);
>  	if (ret < 0)
> -		goto err_cancel_job;
> +		goto err_disable_clock;
>
>  	ret = clk_bulk_enable(ctx->dev->variant->num_clocks, ctx->dev->clocks);
>  	if (ret)
> -		goto err_cancel_job;
> +		goto err_pm_put_autosuspend;

Mix use runtime pm and clock is not good.

You can put clk_bulk_enable() into runtime pm resume call back
and clk_bulk_disable() into runtime pm suspend call back.

Frank

>
>  	v4l2_m2m_buf_copy_metadata(src, dst);
>
> @@ -191,8 +192,12 @@ static void device_run(void *priv)
>
>  	return;
>
> +err_disable_clock:
> +	clk_bulk_disable(vpu->variant->num_clocks, ctx->dev->clocks);
> +err_pm_put_autosuspend:
> +	pm_runtime_put_autosuspend(vpu->dev);
>  err_cancel_job:
> -	hantro_job_finish_no_pm(ctx->dev, ctx, VB2_BUF_STATE_ERROR);
> +	hantro_job_finish_no_pm(vpu, ctx, VB2_BUF_STATE_ERROR);
>  }
>
>  static const struct v4l2_m2m_ops vpu_m2m_ops = {
>
> base-commit: dc59e4fea9d83f03bad6bddf3fa2e52491777482
> --
> 2.47.3
>