[PATCH v9 47/61] drm/sun4i: hdmi: Convert to drmm_connector_hdmi_init()

[Cristian Ciocaltea]

Switch driver over to the new drmm_connector_hdmi_init() signature and
advertise HDMI 1.2 support.  The vendor, product, supported_formats and
max_bpc values previously passed as arguments are now provided through
struct drm_connector_hdmi_funcs, together with the new
supported_hdmi_ver field.

The HDMI connector helpers infer the 165 MHz TMDS character rate ceiling
from supported_hdmi_ver and reject modes exceeding it before invoking
the driver's .tmds_char_rate_valid() hook.  This makes the explicit mode
clock check in sun4i_hdmi_connector_clock_valid() redundant, so drop it.

No functional change intended.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
---
 drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
index 96b2b597caa6..850a8fecf0b5 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c
@@ -192,10 +192,6 @@ sun4i_hdmi_connector_clock_valid(const struct drm_connector *connector,
 	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
 		return MODE_BAD;
 
-	/* HDMI 1.0 max TMDS character rate */
-	if (clock > HDMI_1_0_TMDS_CHAR_RATE_MAX_HZ)
-		return MODE_CLOCK_HIGH;
-
 	rounded_rate = clk_round_rate(hdmi->tmds_clk, clock);
 	if (rounded_rate > 0 &&
 	    max_t(unsigned long, rounded_rate, clock) -
@@ -253,6 +249,11 @@ static struct i2c_adapter *sun4i_hdmi_get_ddc(struct device *dev)
 }
 
 static const struct drm_connector_hdmi_funcs sun4i_hdmi_hdmi_connector_funcs = {
+	.vendor = "AW",
+	.product = "HDMI",
+	.supported_hdmi_ver = HDMI_VERSION_1_2,
+	.supported_formats = BIT(DRM_OUTPUT_COLOR_FORMAT_RGB444),
+	.max_bpc = 8,
 	.tmds_char_rate_valid	= sun4i_hdmi_connector_clock_valid,
 	.avi = {
 		.clear_infoframe	= sun4i_hdmi_clear_avi_infoframe,
@@ -653,19 +654,16 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
 
 	drm_connector_helper_add(&hdmi->connector,
 				 &sun4i_hdmi_connector_helper_funcs);
-	ret = drmm_connector_hdmi_ini2(drm, &hdmi->connector,
+	ret = drmm_connector_hdmi_init(drm, &hdmi->connector,
 				       /*
 					* NOTE: Those are likely to be
 					* wrong, but I couldn't find the
 					* actual ones in the BSP.
 					*/
-				       "AW", "HDMI",
 				       &sun4i_hdmi_connector_funcs,
 				       &sun4i_hdmi_hdmi_connector_funcs,
 				       DRM_MODE_CONNECTOR_HDMIA,
-				       hdmi->ddc_i2c,
-				       BIT(DRM_OUTPUT_COLOR_FORMAT_RGB444),
-				       8);
+				       hdmi->ddc_i2c);
 	if (ret) {
 		dev_err(dev,
 			"Couldn't initialise the HDMI connector\n");

-- 
2.55.0